What Turbo is this? [Merged] Turbo ID Identification

[Efalcon]

Hey guys, i have been reading some posts, and would like someone to look at my pics, and if they have any idea what kind of garrett turbo i have, that would be great.

-I just got the car, and the prev owner got it installed.
-also he has the turbo kicking in at 5k rpm.
-i would assume it is best at lower RPMS.

-Any feedback would be awesome, thanks.

 

[Vdubzr32]

I have this turbo no shaft play it has a Turbonetics exhaust side and a stamp of 4 digit number. (0358)

that's all I can find on the turbo. Can anyone help on what it is.???

I do know its a T3.

 

[eclipse012]

Can you take measurements of the inlet and outlet and possibly the inducer with a digital micrometer? You can search on turbonetics website on the online catalogue - compressor wheels and housings. They have a list of all the turbo's with measurments on there, and you probably will be able to match it up that way.

 

[DSM1G90]

Looks like something Subaru would use with that bolt-on assembly on the rear of the unit

 

[Oakley792]

Pulled off engine, unsure if it is a real or ebay quality. Also small 16g? or big?
Also says on front TD05H then the serial numbers I have pictured.
The turbo has no shaft play and in good condition. What is a good price to list it on Craigslist for?
Thanks for the help!

 

[synthetek]

Its an EVO III 16G. It is a real MHI not Ebay (assuming its still all original inside)

 

[gtrej01]

Worth anywhere between $300 to $500 depending on condition and miles on it.

 

[Turbowrx 32]

Agreed with gtjre01 that's a pretty accurate price range on that turbo used. I would take a look at the compressor blades to see if they might have been "clipped" at all to possibly get a little more out of it.

 

[JusMX141]

Apparently you missed the giant merged thread witht he same title: http://www.dsmtuners.com/forums/newbie-forum/57878-what-turbo-merged-turbo-id-identification.html

Agreed with gtjre01 that's a pretty accurate price range on that turbo used. I would take a look at the compressor blades to see if they might have been "clipped" at all to possibly get a little more out of it.

Turbines are clipped, not compressors.

 

[boostin90gs]

help me out here justin.

i know its garret journal bearing but thats about it.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[JusMX141]

Compressor wheel appears the same as a GT35R, but who knows without wheel specs on both sides.

 

[1gdsmnt58]

Lots of helpful info thanks all you guys for the input I know i didn't start this thread but it helped me too. I have had about 9 DSMs and this past Friday I just picked up my first TSI and this turbo stuff is all new to me.

 

[MALaCasse]

I was told by the previous owner that this was an EVOIII turbo. It looks like it has a 47 stamped on it but I can't tell for sure. I will upload the pic shortly.

 

[92AWDHX40]

Well wait for the pic doesnt sound like a oem one. with only 47 on it.

 

[MALaCasse]

It has 49178-01--0 cast on it. I believe it has 47 stamped in the blank but I am not positive. Has anyone seen a stamp this light?

 

[Bud92gsx]

47 is an evo 3 turbo.

 

[levimits]

Looks like a 47 to me, kinda hard to make out the numbers though.

 

[keithcfisher29]

Looks like a 47 to me

 

[Diamond Star Werks]

It has 49178-01--0 cast on it. I believe it has 47 stamped in the blank but I am not positive. Has anyone seen a stamp this light?

I wire brush could remove them. Its a evo 3.

 

[XiKeiyaZI]

Came with a vehicle I purchased. No shaft play. Compressor wheel obviously has eaten a lego. Not savy enough to know exactly what this is or what it's capable of in good condition.

 

[94awdcoupe]

obviuosly a precision turbo. I remember those exhaust housings well. likley a stage three turbine with either 57 or 60 trim compressor side.

 

[IrishBeatdown]

Man that is chewed to hell but looks like a 57 trim PTE. What is a stage 3 turbine wheel anyways? The 50-57-60 trims ive seen all have the same wheel, in appearance anyways.

 

[JusMX141]

SCM3431E or 4431E based on the compressor spec.

 

[XiKeiyaZI]

Worth rebuilding and what are the possibilities with it?

Edit : With some google work, am I looking at something like the T04E I had a while back on the green talon, Jus?

 

[JusMX141]

Not worth rebuilding, especially if it's a 3431E (57-trim). Sell it, let it be someone else's problem.