I’m looking for a non turbo manual transmission (1999 eclipse gs) in the Nashville / middle Tennessee area if you’ve got one I’ve got $500 lmk

Hello all,I’m about to purchase a 2GA AWD 5 speed transmission to swap in my 2GB. I believe my 2GB trans is getting worn out, so I plan to send my 2GB for rebuild, but before I do I just wanted to confirm once and for all the following.All that is different between these manual transmission...

I purchased a rebuilt transmission, transfer case combo that failed after 5k miles. I didn't verify if the transmission or transfer case were a match since I bought it from a buddy, that bought the car with it built and didn't have any issues when he drove it.I checked the transfer case and...

I bought my Eclipse and I need to rebuild transmission. It only works in reverse and the other gears it just makes clicking sounds. I just got the transmission rebuild kit and I got the Haynes manual, however I can see the diagram on how the transmission is out together. Anyone have any diagrams...

I am looking to purchase my first DSM. It is a 98 Talon ESI. It currently has 90k miles on it. The guy that is selling it says it won't shift out of first gear (4spd auto). The majority of the threads I am seeing here say that the TCM is the cause. Which is fine by me, I can find another one...

Sorry if this is a dumb question but I was wondering if their are any threads with a step by step on taking out the transmission on a 2g and/or putting one in

*Sorry if this is in the wrong section*About 3-4 days ago, I purchased a 1997 Spyder GS 2.4l. It drove fine, no transmission issue while driving. Was on the interstate 30 minutes, going about 55-60. After about 30-35 minutes the car shifted into Neutral and would only rev up. Thought it was...

This might be a dumb question but ive never pulled a transmission untill today and can use some help. I just got my tranny pulled out to change a bad clutch. I had bought a south bend a few days ago. You must be registered to see element. I've noticed the flywheel also needs to be replaced. And...

I'm having trouble with this link that someone posted for me? I found three blue wires only one is solid the other two have a black line in them I found the other two wires perfectly fine. Either I'm just not thinking clearly or there's something in this process that I'm missing, any and all...

I’m in the Nashville area and I need to get a hold of a rear transmission bracket for a manual 420a eclipse asap, here’s what my broken one looks like You must be registered to see element.

I am currently figuring out all the parts I need to do a Auto to Manual swap on my GSX.So far I know I need: 1. 5 speed transfer case 2. the one 5 speed tranny mount 3. 5 speed rear differential 4. shifter cables and shifter, brackets for cable, and matching shifter arms on the tranny 5...

Does anyone know where I could buy a manual transmission to swap with my automatic it seems like no matter where I search I can’t find one For a 99 eclipse gsx

Hello all. Would i put 1st and 2nd gears from fwd transmission to awd transmission? I have an AWD with broken 1st and 2nd gears. And i have clear fwd transmission. I want to swap gears between tranny's. Would i do that?

I have attempted to find this info without really getting a confident answer. However, I can only assume it is due to a supersession, but my part catalog does not show this.In the photos you will see two 5th gear assemblies next to each other. The one of the left came out of a 1993 GSX AWD...

Good evening all!I have recently made the transition from a life of Subaru to my first Mitsubishi, an imported '93 Lancer Evolution. Lower mile vehicle, great service history, I have had it approximately 1k miles and now I can't get the car in gear unless forcing it (did once, will not do...

Hey everyone,Have a blown turbo on my 91 tsi AWD talon. Was discussing getting a new turbo to put on it instead of trying to rebuild the current blown one. Would this be an issue for the transmission that has just around 100,000 miles on it?

I’m currently in the process of pulling my 420a so I can rebuild it but I’ve never pulled an engine before and was wondering if I can disconnect the transmission from the engine while in park before pulling it and just leave the transmission in the engine bay.

In the photo you will see the intermediate shaft assembly sits slightly higher than the input shaft assembly in the case. I believe this is causing too much clearance between the input shaft bearing race and the case which doesn't crush the solder at all when assembled. I did replace both top...

Hey guys I have a 96’ eclipse GS with the Chrysler 420a engine and Chrysler a604 41te transmission. The pump cover/ differential cover leaks transmission fluid. I’ve had this problem for a long time now and cannot figure out a fix. I’ve tried to fix this many different ways. First I tried using...

After some hard driving last night my transmission started making an awful racket so I took the starter off and found that every flywheel bolt came loose but after tightening them up the noise hasn’t stopped, it shifts great through every gear and makes the same noise with and without the...

Hi guys, i need help, i bought OBX FWD LSD and when i tear the transmission, i figured out on the LSD missing helical ring for speed sensor. On stock diff is casted with the case, but on LSD is place to put the ring on … but here is few problems - i have measured dimensions, but dont know what...

Hey guys! I’m going to embark on a journey of changing my main seal due to a leak. I have a 1996 Eclipse GS with a Chrysler 420A and Chrysler A604 41te automatic transmission. I had some questions about the removal of the transmission and the access to the main seal. Is the torque converter...

Hey all,Just finished a clutch, flywheel, and pressure plate swap to the ACT 2100 w/ Street Sprung disk and OEM flywheel (Downgraded from twin-disk competition unsprung clutch). Car is running fine, haven't observed any oddities or clutch slipping besides one: when I downshift, if I don't...

Hey all, I'm going to be changing the clutch in my '91 Galant VR4 (6 bolt) because the previous owner had installed a twin-disk Competition clutch and it's honestly undriveable in a DD setting. I already had the car de-tuned way below where it was at before and it's sitting well below the torque...

Last night I was pulling away from a stop when my car violently kicked out of gear. It happens every now and then so I didn’t think much of it. But when I put it into gear I had 6 neutrals and no reverse. My clutch feels normal and I can’t put it into gear without the clutch. When it is in gear...

Rebuilding / refreshing my 93+ trans with new stuff.I've been referencing the service manual exploded views to see how to put everything back together and check clearances, etc etc.This is the manual I've been using You must be registered to see element.The diagram shows that there is one...

Looking for recommendations on rebuilding/fixing my trans.So my 93 trans has been having issues grinding into 2nd and 3rd and decided to pull it apart to check it out.It was "rebuilt" about 10 years ago by a local shop. Previous owner drove it for maybe 800 miles and then parked it due to...

My 1st, 2nd, and 3rd gear run fine with O/D off. As soon as I click O/D the car shifts, hesitates, and theres no power to the throttle, literally feels like neutral. Yesterday I just rebuilt the end clutch (Seals, Steels, Frictions, etc.) with the IPT kit. What else could be the issue...

Hello, I have been having an issue with my 97 GST for a while that have so far been unsuccessful to solve. I will try to explain as best as I can, but I'm not exactly an expert on this so I apologize if I get the terms wrong and for any confusion it may cause, although I will gladly try to...

Okay, so I went to look at a 3G eclipse today and stumbled upon a 2G GS-T decent condition minus no transmission. I'm very interested however the owner said something weird that is bugging me. They said that the car needs a transmission but it is "European" therefore the transmission is mounted...

My car is a 1GA AWD 1991 with ABS brakes and it has a 3-bolt Non LSD Rear Diff. I found a spare Rear Diff removed from a 1gb AWD 1993 with regular brakes (no ABS). Both car have manual transmissions.Searching in the forums I have noticed the cars with ABS brakes came with Non LSD Rear Diff...

I have a 1999 Mitsubishi Eclipse GS that was an automatic from factory but the guy I bought it off of swapped it to a manual and it’s time for a new transmission. So I was wondering what transmission for other Eclipses are compatible with the 420a engine? being as I cannot find one for my model...

This is going to be a long explanation thread, to the set backs of getting this car painted.May be irrelevant but drove through a really bad storm in the 98’ Eclipse not intentional, lowered and drive through flooding. Car has a minor transmission leak which can be expected for sitting for two...

Can a overshimmed pivot ball cause clutch drag? I max adjusted my Slave cylinder and I'm still getting clutch drag. I did add shims to my pivot ball.It also only drags when I hit limiter, but if I don’t it doesn’t move

Hello everyone, my girl is 1998 GS and i need to change transmission from auto to manual and i want to know, what is the difference beetwen F5mc1 and A578 transmiossoins: In Chrysler PT cruiser is running A578, can i put this box to in eclipse without changes? Thanks!

Alright guys, so I'm in a dire need for suggestion for one of the last steps of my build (hopefully). I've got a 1991 naturally aspirated Plymouth Laser RS 2.0. I am turbocharging it and building it to 400-450-500 whp (it basically depends on the transmission now). My engine is ready (Evo cams...

Hi guys! So I have this n/a 6-bolt 1991 Plymouth Laser with a dead 6 bolt engine. I'm turbocharging it and building it to 500 whp. My current engine is dead, so I'm replacing it with a 7-bolt swap that I bought in great condition. Now I have 2 problems: 1. My original clutch is 6-bolt so the new...

Alright bought this 1997 eclipse rs with a bad clutch didn’t think anything of it I get the transmission off and it’s not a modular clutch I looked the clutch up and it is a pretty expensive one so I was confused what was wrong. Another thing with the trans the clutch fork was broke and it had a...

So I finally got around to dropping the trans on my '92 Talon TSi AWD and took it apart. To my novice eyes it looks to be in good condition, no broken gears, forks or pieces of metal or major shavings, maybe a few tiny case slivers that might have been caused by taking it apart. It needs a good...

Hello looking to swap from a 420a into a 4g63t with trans. Took a brief look at transmissions and was only able to find 2 2g dsm trans for 10k a piece. Is there a suitable aftermarket transmission that will pair well?