Hello looking to swap from a 420a into a 4g63t with trans. Took a brief look at transmissions and was only able to find 2 2g dsm trans for 10k a piece. Is there a suitable aftermarket transmission that will pair well?

I have a 1999 gsx eclipse, and i take it out on the highway alot. With that being said this car rund pretty high rpms while going 80 mph. So my question is how could i get like a 25% taller 5th gear for when im on the highway

As many here know I've been restoring my sub-78k miles manual trans '92 Talon TSi AWD for some time now, and it's finally time to fix the trans, the main issue being its popping out of 1st gear most of the time. I replaced the clutch last year, with a SBC Stage 2 DD kit, with the intention of...

So just recently I have started having issues with my transmission. When the car is off shifting is smooth, when the car is idling it's very hard to get it into any gear, once you get it into gear you can hear some chatter/metal rotating on metal noise, this goes away once you start driving...

I bought a 1999 spyder with a 4g64. The person I bought it from put a new clutch in but didn’t put fluid in the trans and now it won’t go in 5th or revers and really doesn’t like 1st or 3rd. I feel like I should probably put a new trans in it but I’m not sure if it can use one from a 4g63 or not...

Hello, with transmission parts becoming less and less available I am looking at getting my 99 awd transmission rebuilt. I got a quote from jacks transmission for just a standard stock rebuild (which I think is about all you can get anywhere at this point, short of a dogbox) and they also offered...

Hi, I got this transmission from a friend, anyone who knows where it came from (might be a galant non vr-4), and how much it might hold? I also got transfer chase, driveshaft and rear differential from same car

I'm doing a number of rebuild items and realized that Mitsu part numbers show up with other part numbers stamped right on them.For example, the rear differential side bearings ordered from Mitsubishi as MN168441 currently at ~$40 comes in a box with the Mitsu part number, but stamped NSK...

I have a mirage project with everything needed to put a 2g w4a33 transmission in. Axles, kiggly 6bolt in a 2g kit, all the engine mount points were fabed for the 2g trans. So i found and bought a built transmission i thought was the same with code W4A33K1UP6 which is actually an auto from a 1g...

The saga continues. After replacing the clutch and reinstalling the trans recently, I tested it out last week and the car would go into gear and go forward and reverse, fairly smoothly. This was only in a driveway for a few feet either way, but there were no issues getting it into gear or...

I was going to take apart the transmission on my '92 Talon TSi AWD to fix an issue where it pops out of 1st gear, but for a number of reasons I have to put that off for a while, from a few weeks to several months, next spring at the latest. Meanwhile I drained its oil, along with the t-case oil...

I'm about to drop the trans on my '92 Talon TSi AWD manual, to replace the shot clutch and hopefully fix an issue with the trans where it pops out of 1st gear under load (but not with the clutch pedal pressed).I won't be able to know what's causing this let alone fix it until I take the trans...

hello. new here on the dsm community. i have manual fwd 97 gst eclipse with 7 bolt engine and my transmission case is broke from the inside , so i need to find new transmission. in my country there is only 2 cars like me, so i cant find spare parts. i found in usa transmission like i need , but...

I have for sale a used FWD Transmission for a 95-99 2G Mitsubishi Eclipse or Eagle Talon. It was rebuilt as a Shep Racing Stage 1 FWD, around 116,000 miles. I probably put about 35k-40k miles on it after the rebuild.While driving it to work one day, something "popped" in the Trans. Not sure...

Hi, i'm new to this car and not from the USA. I need some advice with replacement of the transmission of 1G GS 150hp. Sadly i am not able to find the same, but have found a lot of 2G GS ones. Are they direct replacement or should need something else to drop a 2G tranny instead of the 1G?

I just sold the engine out of my 2G FWD and am selling the trans to a friend of mine. Unfamiliar with all the ins and outs of the DSM world, there is a pilot bushing installed on the end of the crankshaft for the automatics. Okay, no big deal, just go buy another one if you need one...

Hi,I am new to this and really appreciate the help of guys who did the swap. have a 2G Eclipse and building it for drag racing looking at 800+ bhp. I am buying a PPG gear set and an AWD transmission to put it in. Can you please help figure out the below:What Axles should I be after? FWD...

Hello ladies and gentlemen, I have a 1997 eclipse gst 5 speed that I have had for years. Deep into the build at this point and last year I got it running for the first time since I owned it. I noticed that 1st gear is weird. If I am rolling it will go into 1st smoothy but if I am stopped, I...

Recently my 3rd gear has been acting up. It has always been sort of "crunchy" especially when shifting hard from second to 3rd at high rps and boost. The other day i did a pull in second then shifted into 3rd and thought all was good until i got back on the gas and the engine just revved as if i...

I put this together so you’ll only need this page for most torque specs to replace rear main seal, flywheel, clutch or manual transmission.I left off simple items like slave cylinder, downpipe and other small brackets/miscellaneous items.Rear main seal 7-9 ftlbs Oil pan bolts 5 ftlbs...

For those who are or have already restored a 2G,Now that they've stopped making parts for these cars, how do you handle replacement/repair of: Sunroof Airbags Ignition system Transmission and clutch ??In particular,I have a leaky stock sunroof due to rusting between the glass and the...

Already did it. Gonna work out great I think.But just curious, anyone else have to do this. Bought all mounts on extreme PSI. Car is a ‘95 FWD. I’m assuming the AWD needed the extra bolt. The FWD did not. I had to cut it then grind an indent in it to clear the cap of a bolt so the mount will...

Hello I need some one to shine some wisdom on me. Am using a F5M31 1ZPML tranny on my Galant turbo swap the question is will it hold?From what i have found the tranny came out from a Mitsubishi Space Wagon (N30/N40) 2.0 Turbo diesel 4D68T engine am worried that i could break it. The swap is...

Does a T56 Bolt up to an eclipse block with an adapter plate made and will it support the torque?

I need an output shaft for my 1997 Eclipse gsx. I’ve been having a hard time finding one. Preferably good used one. It’s too expensive for a new one. Thanks

Hello guys, I want to upgrade my 1G Targa with AWD. So the first thing I am searching for is an AWD transmission, but I don't know what Transmission I need to get. I have a 6-Bolt Engine, can it also fit a 7-Bolt transmission and can I also use the transmission from a 2G DSM?It would be really...

So... Call me crazy. But has anyone tried this? Or have any info (gear ratios the same?) Apparently the F4A33 was used in V6 sonatas I’m assuming the bellhousing is different..I’m heading to the junkyard Friday, and am scooping one up to see if I’d simply be able to switch some stuff around...

So I recently pulled the motor and transmission out of my 95 eagle talon tsi fwd, and I got the motor and the transmission back together got everything redone.. and now I have an issue, at first I noticed my wheels didn’t lock up while in first gear, while I was standing on the wheel to get a...

Noticed that the engine I am building has this mount broken off on the bedplate. Of course, I notice this after it is assembled with new parts. Second picture is a bedplate without mount broken off. Am I screwed with this bedplate, or would it be ok to run without that transmission bolt?You...

Hello everyone. So I've been searching but can't seem to find quite a direct answer. I have a 1995 and a 1997 Auto GSX and i was wondering if the GST auto trans is interchangeable with a GSX. I have found forums of people swapping a GSX trans into a GST but what about using a GST trans for a...

In my previous post I talked about wanting to swap a GSX into a Sebring. Really the biggest part(s) that will be holding me up in the future will be the transmission swap. The GSX donor is a manual but my wife wants an automatic.I've read about all that is needed, new rear diff, the tranny...

I have a fresh 2G auto GSX Transmission including all related parts (CV axles, driveshaft etc) make me an offer on something you need. There is nothing wrong with any of the parts, I bought it for the engine. Text only please @ 475-235-7841 Parts are located near Augusta GA, I am willing to...

Alright so I've got a fully built 6 bolt, cp pistons, bc rods, the whole 9. Running a hx40 and hoping to make something in the neighborhood of 600-700hp to the wheels, my question is what trans do you guys recommend out there for this sort of power level? I know of jacks, and TRE and came across...

I will try and make this long story short, I loaned my car out to my brother inlaw to drive to school for a bit and one day he said there was something wrong with it. That trip ended with him stranded on the side of the road and the clutch toasted on the car. I went to get the car with a...

This is going to be long to try and provide most of the info. Tons of work done to car recently:-IPT reworked valvebody, included filter and gasket -IPT end clutch kit -Castrol ATF+4 -New throttle body gaskets, shaft seals, o-ring for BISS -JMF ext wastegate o2 housing, o2 dump -Tial MVS w/...

Turbo. Pte 6165 DBB rebuilt as gt35r/gt37r hybrid with brand new billet gt35r 11 blade, brand new large frame BB cage, brand new gt37r turbine wheel. .63ar t3 turbine cover, .70 anti surge compressor cover. All genuine garrett parts. 0 miles never used. Good for quick spooling 600hp...

I was doing a general rebuild, but found that the oil guide is broken and as a result 5th gear has been damaged. As no one seems to carry the individual parts any longer, not even Jacks, I have considered just getting another F5M33 tranny and parting it out.I have found a quite a few between...

I am currently missing part number - MD744671I need it to finish my conversion for my eclipse....Its an "adapter" for the tranny my mits dealer told meBelow are some pics

Is anybody selling or know where I can find this part....I need it to finish my conversion from an auto to manual 2g eclipse spdyerMits said it they dont make it anymore.....the part number is MB936595, they call it an "Adapter Bracket"

Hello, thanks for your time. I want to put a GOOD clutch in it and I'm finally making big boy money so I'm able to. What exactly do I want? That is the question. I don't plan on throwing any boost at it or any timing or anything like that until I have ALL the supporting mods.. I want it to be...

I have swapped 1990 1.8L 4g37 for 1992 4g63 including tranny KF5M222VPZ / PA9159. I left the 1990 shift cables in. Now when I shift there is not enough travel/throw to fully reach 1st and 3rd gears (only half-way) but there's enough travel to engage 2nd and 4th gear. The whole offset of the...

I have a 98 gsx that I just bought , has 6 bolt swap . Has new transmission but when u pull it out of park it doesn't move. It doesn't do anything in any gear.

I am trying to remove the plastic on my center console so I can get to one of the bushings on my shifter and to change something for the handbrake, but I don't see any bolts or clips to take it off? I checked on the sides and in the middle storage area. Can someone post pics or give a specific...

Hey guys!So i'm building my box at the moment and I've just run through and done a set of solder crush tests using soft 3mm solder as instructed by the transmission service manual. This box had seen ~80 thousand miles before I removed it due to the crankwalk bolt stripping the thread out of...

I am going a different route with my car, and changing the transmission and clutch at the same time. This clutch has about 500-600 miles, so barely broken in. $250 shipped in the USA (lower 48). No international shipping.You must be registered to see element. You must be registered to see...

Hey guys, i have a 90' GSX i just got running a few months ago. have going through it trying to make sure everything is up to snuff. i took it down the road and had a bad steering wheel wobble so i pulled the tires and checked everything and it all seems to have been replaced recently. So i...

Hi Tuners, still in the process of going through this Talon and trying to get things in order. I got my ECMLink installed and got it running (like sh**, but running nonetheless) enough to drive it. I got it out on the road and when I shifted 2/3 it grinded going in to 3rd. Sometimes it'll grind...

For sale, the transmission right out of my car. Currently running and driving perfectly. Has like 100 miles since a top to bottom refresh from TMZ performance and myself. Evo 3 1st through 4th gear, double syncros, welded center diff. Also will include good condition front axles and...

Please help my 95 Mitsubishi. Eclips is stuck in second gear automatic transmission was driving fine then bam stuck what do i do to diagnose the problem i need it fixed asap

so I’m buying a 2g gs from a guy in my area. I’ve been in love with these cars since I was a kid because of the build my dad had. It’s 200 dollars. Reverse gear is out so I’m either gonna do a trans rebuild or drop a manual in it since it’s an automatic. 190,000 miles. Guy said he bout it off a...