The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI
dsmmario

Latest activityPostingsVehiclesAbout

    • dsmmario
      dsmmario replied to the thread 1990 AWD Talon Flash Red 5spd.
      When trying to get my 1g started after my rebuild and I was getting a bad fuel leak no matter how hard I tightened the flare nut on the “various mfg” PF8164 (PF5114) filter I bought from RockAuto.com. I believe it was a Purolator. So I tried a...
      • IMG_6896.jpeg
      • IMG_6907.jpeg
      • IMG_6908.jpeg
      • IMG_6895.jpeg
    • dsmmario
      Put a fresh water pump gasket on since I botched the gasket the first time around. I didn’t have the radiator in so I couldn’t leak test it the first try. Used some fresh bolts from Jmztuning. The belt took me too many tries to get tensioned...
      • IMG_6713.jpeg
      • D15704B3-1540-413B-9175-4795EC5E303E.jpeg
    • dsmmario
      dsmmario replied to the thread News about Joe Bucci.
      I first met Joe in Tampa when I lived there almost 25 years ago. I remember racing against him at Bradenton in my previous DSM. His and Turbo Tom’s podcast and videos are the main reason I bought another DSM. I’ve been so gutted to hear this...
    • dsmmario
      @pieceofcloth is a very very generous guy and I, myself, can't thank him enough either!
    • dsmmario
      Thank you to @pieceofcloth for generously sending me a timing tensioner bolt since I couldn’t find mine. Got my belt on and tensioned after three tries. Hopefully I’ll be back together by the end of the month.
      • EC83AEF9-F34F-4C93-8108-B382260C5105.jpeg
      • IMG_6604.jpeg
      • IMG_6598.jpeg
      • IMG_6601.jpeg
    • dsmmario
      I was going to consider a 2g one. It looks like the the difference from 1g to 2g is that they went with a lock washer plus a flat washer vs the flange head and flat washer on the 1g. Their effective length may actually be the same but its been 20...
    • dsmmario
      dsmmario reacted to cswindel's post in the thread What did you do to your DSM today? with Like Like.
      Josh over at JNZ Tuning @DSSA may be able to source one for you. He has hooked me up with pretty much everything I need for my rebuild (granted I have a 2G)
    • dsmmario
      Our bolt size chart says 51 mmThis is only 1mm shorter. Probably not a 12mm head but itll work just fineM8-1.25 x 50mm Flanged Screws Flange Hex Bolts, 304 Stainless Steel 18-8, Plain Finish, DIN 6921, 5 PCS https://a.co/d/1q5aHILThe JIS...
    • dsmmario
      Wrong bolt. The one you’re specifying is for mounting the hydraulic tensioner. The one inquired about is for the tensioner pulley, and barely cut off of your screen capture at the bottom.M10 x 1.25 x 33, flange bolt@dsmmario - worst case...
    • dsmmario
      I snagged one from JnZ for my build as I didn't have any spare fasteners for the front. I need to get the front cover bolts too as no spares (if I find a good cover 🤞) for it either.
    • dsmmario
      My bad. I read tensioner bolt and thought he meant that one.Heres is a Jis 35mm(5) M10-1.25x35 Hex Flange Bolts Class 10.9 JIS Small Head Frame Cap Screws Zinc https://a.co/d/6UeQCL2
    • dsmmario
      I attempted to do my timing belt on my 1G but I seemed to have misplaced my tensioner bolt, or accidentally used it elsewhere. Does anyone have one for sale since they are discontined.
      • IMG_6470.jpeg
      • IMG_6472.jpeg
    • dsmmario
      dsmmario reacted to Rohitter7878's question on the classified ad For sale 2g J-pipe. with Like Like.
      Does this angle more towards the driver side than passenger side?
    • dsmmario
      dsmmario posted a question on the classified ad For sale 2g 2G OEM Radio Bracket Set.
      How much is a set of 1g brackets?
    • dsmmario
      dsmmario posted a question on the classified ad For sale 1g JDM Cyclone intake gaskets.
      What did you find was a good crossover point from your dyno testing?
    • dsmmario
      dsmmario replied to the thread 1990 AWD Talon Flash Red 5spd.
      I was trying to install my head but one of my arp studs wouldn’t bottom out. Turns out Autozone has a thread chaser set as part of their loaner program and has the M12x1.25 we need for our 6 bolts. After running in it down I was able bottom out...
      • IMG_6098.jpeg
      • IMG_6097.jpeg
      • IMG_6099.jpeg
      • IMG_6101.jpeg
    • dsmmario
      dsmmario replied to the thread 1990 AWD Talon Flash Red 5spd.
      I started the new year off by assembling the cyclone intake after painting it. Now I just need to knock the surface rust off the block and drop the head back on. I really hoping to get it back running by the end of the month before I get busy...
      • IMG_6070.jpeg
      • IMG_6069.jpeg
      • IMG_6063.jpeg
      • IMG_6065.jpeg
  • Loading…
  • Loading…
  • Loading…
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top