What Turbo is this? [Merged] Turbo ID Identification

[Archer Fabrications]

Ahhh good ol engrish. Chinese are great at it.

 

[CrackedDSM]

Ahhh good ol engrish. Chinese are great at it.

funny as hell. MOEDL.

 

[JusMX141]

100% authentic Chinese garbage.

 

[Doubleot]

Turbo related, what's the part number for the stud on 16g's?

 

[Zufelt]

Buddy decided to throw this turbo on his car.. Just trying to help him out as I think it's an eBay junker hence the words "turbo" on it any ideas? The side says WL AR .50

It's a t3t4 hybrid as I was told.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[hubz91talontsi]

Turbo related, what's the part number for the stud on 16g's?

Turbo Mounting Bolts Hardware - NON-OEM Nuts / Bolts / Studs - TD04 + TD05#-#Mitsubishi 3000GT#/#Dodge Stealth Parts

not the part number but here is where you can get them

 

[Doubleot]

Thank you!

 

[JusMX141]

Buddy decided to throw this turbo on his car.. Just trying to help him out as I think it's an eBay junker hence the words "turbo" on it any ideas? The side says WL AR .50

Junk- worth about $130 new.

Genuine turbos have no need to identify themselves.

 

[latkins09]

i have a turbo that came with my car but im not sure if its a knock off or a real one

 

[Jon91TSi]

According to that number it's an Evo3 16g. It's a genuine MHI WGA correct to that turbo. So yes, it apprears to be genuine.

 

[Insane20]

http://www.dsmtuners.com/forums/articles-turbo-system-intercooler/313105-16g-serial-numbers.html

Read the first post.

 

[latkins09]

its a 7 not a 2 band camera angle

thanks for the info guys

 

[michael102691]

Just got this turbo , compressar housing says a\r 70 ec-1 m24

The hotside is precision a\r 82
Part number thgt2-76

 

[JusMX141]

If I had to guess, PTE SC6776SP. Part number should be engraved in the outlet of the compressor cover.

Might have a ball bearing center housing, but the photos are so poor I can't tell. Looks like it could use a rebuild- turbine wheel appears pretty wet. Don't use that particular oil drain with the 90* fitting right out of the turbo like that.

 

[lasershark]

so my buddy has some parts laying around we work opposite schedules so its hard to get an actual look at his stuff

whats your take on this garrett? and what might it be worth? thanks

 

[JusMX141]

Antique Garrett T04B; unknown compressor wheel. There are tons of compressors used in these which all look the same but can differ by as little as .5 mm on the inducer. Exducer will be 70mm; inducer will be 48 to 55.5mm.

Stage 1 turbine wheel, small a/r turbine housing...missing the wastegate actuator. Definitely some low-boost OEM automotive application like a Saab or Mercedes diesel perhaps. Appears to be in rebuilt condition; no clue on it's value, so we'll say exactly what someone is willing to pay and not a penny more.

 

[lasershark]

thanks Justin

 

[ErikTande]

I've been looking for a td05 20g, and there's a local guy on CL selling a turbo that he says is a Mitsubishi 16G with 20G wheel in need of a rebuild. Does this look legit?


**EDIT** I looked up the numbers, and I think it's for a Subaru

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[JusMX141]

It's a Subaru turbo- the compressor cover appears to have been machined. The compressor blades are also hooking, so the wheel needs replaced....this normally happens as a result of rubbing the cover from excessive play, so figure it needs a rebuild and a compressor replacement at the very least.

 

[RLSchwabe]

Hey folks, just wondering if anyone could help with this Turbo. The posting says it's a Td05 and he's also selling a few 1G Parts. I text him to ask if it was a 14B, he says, " Yes. " - But I'd just like to double-check.. being Craigslist n' all. So feedback on this would be appreciated!

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[JusMX141]

It's a 14B.

 

[RLSchwabe]

It's a 14B.

Thanks man.

 

[pbwu1f]

20G? It looks bigger but I'm not sure.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[JusMX141]

Frank L3, L4, or L5 20G depending on wheel specs.

Compressor wheel's damaged....good luck finding one of those.

 

[pbwu1f]

Is it junk or do I have options?