Where to buy reducer couplers?

[99'EclipseGS]

I'm looking for a 3"-2.25" reducer coupler for my 3 inch intake-my 16g. i have a 2.5 on there now and its too big. I've looked on plenty of websites and ebay and haven't found anything. Can anyone help me out?

Thanks

 

[LiquidX]

Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

 

[gofer]

I'll go a step further and get you to the right one...

3" to 2.25" reducer (BLACK)

 

[99'EclipseGS]

Thank you!

 

[nkosi]

That is where i buy all my silicone coupler and they have very good service and fast shipping

 

[99'EclipseGS]

Which place nkosi?

 

[DSMGary]

Which place nkosi?

Both of the links are from the same website dude...

 

[9!'clipseDOHC]

I've ordered from them before too; good site, great prices.

 

[turbolarry]

Don't forget about supporting vendors who contribute to dsmtuners;
EXTREME PSI : Your #1 Source for In Stock Performance Parts

 

[LiquidX]

$10>$27

 

[MY1GDSM]

$10>$27

Price isn't everything a lot of the time you get what you pay for... . besides where did you get $27 from?


If this was for a Intercooler pipe I would say no doubt get this one instead an Direct you to one of the Best Vendors here an Suppliers of Couplers an IC parts out there Period... .ETS 2.25" to 3.00"

coupler above specs

Genuine 4-ply Silicone
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm - 5 mm

ETS Specs

* 3/16" Wall Thickness
* 4 Ply, Polyester Reinforcement
* Smooth Wipe Finish
* Withstands temperatures from -40F to 500F
* Resistant to UV, Water, OZone, Oxygen, and Oil
* Working Pressure: 80psi
* Burst Pressure: 240psi
* Built in ISO 9002 Certified facility
* 100% Pure Silicone, not Rubber Composite

Thought I'm sure both would work just fine for a Intake

 

[LiquidX]

You forgot the second part of the "genuine 4 layers"
Genuine 4-ply Silicone (5 silicone layers plus 4 reinforcement layers = 9 total layers!)

There are only a small handful of people on this forum that would need the fewer benefits that the ETS coupler has.

30+ PSI on the cheap ones and holding strong without issues on my whole FMIC setup.

Price isn't everything a lot of the time you get what you pay for... . besides where did you get $27 from

$19.45+$7.50 S&H = $26.95

 

[gofer]

...and in this case the coupler is only going to be under vacuum since its going on the intake like MY1GDSM mentioned.

 

[BigBeans]

There are only a small handful of people on this forum that would need the fewer benefits that the ETS coupler has.

30+ PSI on the cheap ones and holding strong without issues on my whole FMIC setup.

Same here.

I'm also using those couplers and haven't had an issue at 30+, so i'm sure they'll hold just fine on the intake. I just don't see the benefits of the added cost for this application.

 

[MY1GDSM]

$19.45+$7.50 S&H = $26.95

So the other brand ones are $10 shipped?

There are only a small handful of people on this forum that would need the fewer benefits that the ETS coupler has.

That is a matter of opinion... either way, I said "I'm sure both would work just fine for a Intake"

You forgot the second part of the "genuine 4 layers"
Genuine 4-ply Silicone (5 silicone layers plus 4 reinforcement layers = 9 total layers!)

I left it out intentionally because it would give the impression that they were not equal in that respect and I can assure you they are...

 

[LiquidX]

So the other brand ones are $10 shipped?

The shipping is like $5. I've ordered from them a few times and everything has been great

That is a matter of opinion... either way, I said "I'm sure both would work just fine for a Intake"

They will both work excellent for anywhere on the IC tract.

I left it out intentionally because it would give the impression that they were not equal in that respect and I can assure you they are...
I thought it was funny

There you have it. I dislike trying to make multiple quotes on a phone.

 

[92AWDHX40]

Exactly^.

 

[Calan]

Just for future reference - I really like dealing with Hose Techniques. They have fantastic customer service and different grades of couplers and silicon hose.

 

[92AWDHX40]

Ive used stm,ex psi, and samco all great.