What did you do to your DSM today?

[curt-s]

And your step was correct? weird. Only thing I can think of then is either the ball or fork is worn, the fork is bent, or the PP fingers aren't sticking out as far as they need to due to manufacturing error. Either that or your clutch disc is too fat causing the fingers to retract further inward and thus bringing the TOB closer to the flywheel

 

[CrackedDSM]

And your step was correct? weird. Only thing I can think of then is either the ball or fork is worn, the fork is bent, or the PP fingers aren't sticking out as far as they need to due to manufacturing error. Either that or your clutch disc is too fat causing the fingers to retract further inward and thus bringing the TOB closer to the flywheel

Pretty sure step height on this flywheel is incorrect. Me and Paul Volk both have the same exact issue and both have unused ACT Flywheels.

Tim Z in my build thread stated he measured three new act flywheels at his shop recently and they were all .607-.608.

 

[chrisman287]

Well, guess I gotta do some sketchy stuff to shim the pivot ball now. Lol. Because I'm not dropping the trans right after I just got it all back together

I’m surprised you didn’t check that beforehand. I think I have to do the same myself. What sketchy ideas do you have in mind? Cause I’m all for it

Edit: I did find this..

Mitsubishi Eclipse GSX 1G Clutch Fork Pivot Ball Shimming Without Removing Trans Axle

After trying to bleed the clutch on my 1994 1g Eclipse in every way possible to man, I am forced to look elsewhere for the cure. If you search the forums it seems like bleeding the clutch is a big problem for DSM cars. I believe the problem is in...

web.archive.org

 

[SixBolt_16G]

Had a local guy polish out my thermal exhaust muffler since it looked dull and dead. Difference is night and day!

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

@Mahreeoh17 Nice! By far my favorite exhaust that Ive ever had on any of my cars in the past. Hope you like it as much as I do.

Were you able to get the rest of the piping with it?

 

[Mahreeoh17]

@Mahreeoh17 Nice! By far my favorite exhaust that Ive ever had on any of my cars in the past. Hope you like it as much as I do.

Were you able to get the rest of the piping with it?

Yes I did. Plan to make it 3in all the way to the turbo.

 

[curt-s]

Pretty sure step height on this flywheel is incorrect. Me and Paul Volk both have the same exact issue and both have unused ACT Flywheels.

Tim Z in my build thread stated he measured three new act flywheels at his shop recently and they were all .607-.608.

Didn't I remind you to check before install?
My new act streetlite, produced in the past 6 months if I recall seeing the sticker, measured out .608-.609.
Don't psyche me out here.. I have a v2 ceramic 6 puck going in, I don't need no drag.

 

[92AWDHX40]

Changed the plugs fired her up waiting to bleed clutch. Hopefully I can get a space at a friend's paint booth .

 

[Joewy Rodriguez]

After 3 years finally starts for first time

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[CrackedDSM]

Didn't I remind you to check before install?
My new act streetlite, produced in the past 6 months if I recall seeing the sticker, measured out .608-.609.
Don't psyche me out here.. I have a v2 ceramic 6 puck going in, I don't need no drag.

You did. And what’s funny is when I first installed the trans I had a moment where I was like “I think I should install some shims on this pivot ball, it looks close to the passenger side” but I didn’t do it.

I swear every time I ignore that little voice it bites me in the asshole. Directly on the hole. No mercy.



But: on topic for the thread I removed everything that’s in the way of dropping the trans except exhaust and tcase. Then I spent almost an hour and a half fighting with the passenger axle which now refuses to come out. Almost snapped a 1” prybar attempting to get it out. There’s no other good spots to pry either.

I’m just gonna see if I can drop the trans tomorrow with the axle still in it but out of the hub. Soon as the sun goes down the murder mosquitos ms13 gangs come out.

 

[TerminalTalon]

Friday night-Monday night.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[mx3baker]

Made up a small bracket for the PTU to mount on my EVO3 manifold

You must be logged in to view this image or video.

 

[92AWDHX40]

Bought some paint today to do some work on Jade, nothing special experimenting for now, unitl i get a booth to spray, more blocking today.

 

[92AWDHX40]

Decided to paint looks better I need to clear and finish but im really happy to have progress made whew

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[MindBlowin03]

Took it for the first drive yesterday. Although only a few miles everything went well. No crazy noises and no puddles under it . Today I decided to wash it up and give it a quick detail.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[curt-s]

Took it for the first drive yesterday. Although only a few miles everything went well. No crazy noises and no puddles under it . Today I decided to wash it up and give it a quick detail.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

So what's the 'AMG' part? I'm curious

Today.. I actually did stuff. First baby steps.
Tested out the new 5gal parts washer with some simple green, cleaning the oil pump housing. Spent over an hour scraping the gasket off the OFH. Decided I need a torch if I'm removing any of the fittings on it, especially the one that was.. pipe doped, I think.

 

[MindBlowin03]

So what's the 'AMG' part? I'm curious

Back in the day, AMG worked with Mitsubishi and made a limited run of AMG built Galants. About 500 were made. Part of that was adding the spark plug cover that you see on my car.

I added it last year and mostly for the looks and questions I get at the car shows.

 

[19Eclipse90]

And the AMG spark plug cover is part number MD146678.

 

[CrackedDSM]

Rebuilt the shifter and contemplated my DSM future. If a new flywheel and oem master doesn't fix the clutch not disengaging, I will have no clue how to fix it. Times like this, I wish I lived closer to DSM OGs who could help me in person. I just can't learn by words or images on a screen.

 

[steve]

I just can't learn by words or images on a screen.

I guess you'll have to learn by dirty hands and busted knuckles.

 

[CrackedDSM]

I guess you'll have to learn by dirty hands and busted knuckles.

Got plenty of those this week. But man, I just keep getting this feeling that it's something stupid and small that I'm missing somehow.

 

[jdxnc]

Collecting more and more parts for 2024's upgrades.

You must be logged in to view this image or video.

 

[DreamChaser7]

Took it for the first drive yesterday. Although only a few miles everything went well. No crazy noises and no puddles under it . Today I decided to wash it up and give it a quick detail.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Let me know when ur ready to sell it..

 

[curt-s]

Back in the day, AMG worked with Mitsubishi and made a limited run of AMG built Galants. About 500 were made. Part of that was adding the spark plug cover that you see on my car.

I added it last year and mostly for the looks and questions I get at the car shows.

That's awesome, I had no idea. I'm green with envy. Well, of that, and the colour. It's so beautiful it kinda hurts.

I have an Evolution GVR4 long block and head, so I think that cover belongs over here

 

[CrackedDSM]

Those AMG specific cyclones are incredible units too. They have a plenum that looks like a Magnus cast V3(slightly smaller of course) before their dual runners. I had one chance to buy one but got sniped.

 

[import solutions]

Making this , is my first time doing a header/manifold

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.