Turn signals not working( checked fuses, bulbs,) hazards work? help

[2GEEZEY]

RESOLVED My turn signals decided not to work? I have a mint 97 gst, all fuses and bulbs are good. When i press my hazards they work fine, blink and flash on the cluster.

My turn signals however, dont flash or blink on the cluster. help!? Turn signal fuse is all good.

 

[MilwaukeeGSX]

have you removed anything from the dash recently?

 

[debbie]

Do the turn signals come on at all but just dont flash? or is there nothing what so ever. I'm thinking it could be the relay that makes the lights flash has gone.

 

[ilco187]

if the hazards work i think the turn signal switch under the steering wheel might be worn or bad or bad connection.

 

[2GEEZEY]

nope haven't removed anything. And they do not come on what so ever, no flash or clicking.

hazards work perfectly fine though

does anyone have a pick of the turn signal switch underneath the steering wheel? or are you talking about the one that controls the headlights, brights, etc.

 

[freelancefool]

The service manual says that you need to remove the steering wheel to access the turn signal switch. This is incorrect. You will need to remove the wheel to replace the clock spring. It takes about 15 minutes to swap turn signals.

2GNT.com - Turn_signal_switch_swap

 

[2GEEZEY]

are you sure its a turn signal switch? theres not other fuses I should check?

 

[2GEEZEY]

they just randomly started working again. I didnt do anything.