The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

The 14b Drag Race Discussion Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

23psi is pretty high on the little 14b..

Exactly! I know I have to be awful close to the ceiling where any more boost isn't going to help. I doubt I'll turn it up any more in interest of saving the poor little fellow. There are other things I can do if I need more power.

Moving the top ten here since it fell back 10 pages now. And because I do like seeing my name on there ROFL

1. Joe Bucci 10.876 @ 123.83 FWD
2. Nate Crisman 11.377 @ 116.63 AWD
3. Phil Beers 11.497 @ 113.85 AWD
4. David Womer 11.514 @ 118.13 AWD
5. Leon Reitman 11.642 @ 116.56 AWD
6. Nick Carleton 11.767 @ 115.93 AWD
7. Aaron Sadorf 11.76 @ 113.37 FWD
8. Lucas English [email protected] - I know he ran 11.7 and blew up his 14b AWD
9. Shane Webster 11.812 @ 115.69 AWD
10. Rob Harfman 11.938 @ 119.41 FWD
 
Before I put the cams in, I saw a peak of 25.2 psi in 4th, dropping to 20 by 6k and 24 psi in 3rd dropping to 17.5 by 6k. With the S1s, I see 23 psi in 3rd, dropping to 16 by 6k with the same airflow numbers.

On another note, I picked up 2 more slicks and got them mounted on a new set of wheels (Drag DR-34s). I've got my AWD trans back from JNZ for a refresh, just need to drop it in and throw the 4 bolt back in and I'll be ready to rock again in AWD mode. I also want to get the rear toe elim kit welded in and find some more weight to remove to make up for putting the AWD stuff back in.

You must be logged in to view this image or video.
 
Ill post a log when I get home tonight to show my boost curve, boost settings, ect for the 11.3 run.

Edit: log is ttched.
 

Attachments

You must be registered for see attachments list
Last edited:
I think there's some 14b action taking place tonight somewhere...
 
Lol I just removed my 14b to install the 7cm housing and when I took.it off I found this.
In my defense it was late when I installed it but that just shows how much attention I paid to it when I got it. -_-
 

Attachments

You must be registered for see attachments list
Lol I just removed my 14b to install the 7cm housing and when I took.it off I found this.
In my defense it was late when I installed it but that just shows how much attention I paid to it when I got it. -_-

That looks very nice! Just one small crack and it's already ported. It's a little black and sooty looking though, you might be running a little rich.
 
That looks very nice! Just one small crack and it's already ported. It's a little black and sooty looking though, you might be running a little rich.

I bought it off ebay for 66$. Dude said he bought it for a project that never developed. Lol he told me shipping cost him 33$ too.

And yeah I'm running it just below fuel cut untuned right now. About 17psi. reason it runs rich up there. I turned the maf screw out some but still think it needs,alil more leaner.,
 
So awesome Shane, congrats!
 
Sorry guys. I'll post more info later, but I'll give the time away. Thanks again Paul for letting me use the hoosier qtp's on my dream wheels! Motegi traklite 2's!

1.57 60'
[email protected]!

As said I'll make a thread and tell the story tomorrow! So stoked right now!

#5 baby!

Congratz Shane! Awesome time!
Any plans to hit the track again this year? If you do I might have to put together a 14b setup to reclaim my position! :hellyeah:
 
Sorry guys. I'll post more info later, but I'll give the time away. Thanks again Paul for letting me use the hoosier qtp's on my dream wheels! Motegi traklite 2's!

1.57 60'
[email protected]!

As said I'll make a thread and tell the story tomorrow! So stoked right now!

#5 baby!

Awesome job man!
 
Great job Shane!!! Good to see you working up the list.

I came to update a little that I got my 14b all mounted up finally after screwing around with a couple crappy evo housings. Ended up just throwing on a b16g housing for now. Looks like for me everything's coming together and looking good for the 13th.

I also weighed my new skinnies compared to the 17" wheels on the back and I should be losing another 30lbs off the total car weight. I may be very close to the 2100lb total race weight.

Hey are you guys all running your coolant lines to the turbo?? Mine are capped off since my 6262 is only air cooled. Not sure if I wanna deal with the hassle.
 
What's more to say man, another big congrats! You were certainly the 14b performer of the year! You are now so quick that in a heads up race with me or Dave, even Nate, reaction time would decide it! Super impressive!

Congratz Shane! Awesome time!
Any plans to hit the track again this year? If you do I might have to put together a 14b setup to reclaim my position! :hellyeah:

If I told you he has you beat to the 1/8 mile would that motivate you?
 
Last edited:
Nice job Shane, congrats! That moved you up a couple spots. :) How long is your season over there?

Thanks Kevin! The season goes until the beginning of November but I'm done for the year. I can't expect to borrow slicks again and even if I did I think this clutch is on it's last leg. We'll come back out next year gunning if I can work up the funds!

And thanks everyone else too!

And I didn't mean to steal your thunder there MJcanada! That's pretty cool that you got that surprise!
 
He would certainly beat me, I routinely get 5-10 second reaction times, often the opposing car is nearly at the traps when I launch. (Auto)

I think you need a some practice, could probably cut that time down a little, no? :D

If I told you he has you beat to the 1/8 mile would that motivate you?

Whoa, I didn't notice that. Def a great 1/8th time!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G DSM Link V3
    2G DSM Link V3 $600 + shipping and paypal fees* no cable included * cables are 75 on the...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g Shot in the dark (2g Pass strut cut out)
    Need 2g strut tower to save time.
    • frosh29
    • Updated:
    • Expires
  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top