1G Removing Rear Motor Mount

[GES]

Hello to all!
Any info on removing the rear mount would be appreciated. I've done the other three but am finding it difficult to access the fasteners for the rear one.

 

[pma1123]

Theres just 4 12mm headed bolts that thread vertically into the subframe, right? (on an AWD anyhow)
Well, and the cross bolt.

 

[1990TSIAWDTALON]

Rear Roll Stop? AWD or FWD?

 

[92AWDHX40]

3 bolts right 14mm to remove the rear mount

 

[1990TSIAWDTALON]

Out of my 1990 FSM

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Badge023]

Very long 3/8" ratchet extension with a 14mm swivel socket and attack from the top. I think I got the cross bolt from the passenger side. Jam a wrench on the nut.

 

[GES]

Rear Roll Stop? AWD or FWD?

It's a 91 Eclipse GS, fwd, 1.8L, auto trans and it's the rear roll stop mount. That mount appears to be mounted on a long support member and wonder if that needs to be removed along with the mount.

Very long 3/8" ratchet extension with a 14mm swivel socket and attack from the top. I think I got the cross bolt from the passenger side. Jam a wrench on the nut.

Thank you!

Out of my 1990 FSM

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Thank you for posting that!

 

[1990TSIAWDTALON]

I have the 1.8L info also if you need a picture from the manual. Just let me know. NP

 

[GES]

I have the 1.8L info also if you need a picture from the manual. Just let me know. NP

Thank you for the offer but I just located my factory service manual with that info!

 

[ItsTwan309]

Out of my 1990 FSM

You must be logged in to view this image or video.

You must be logged in to view this image or video.

this is how you answer a question!