2G Flex fuel installation kit (E85)

[TSI_too_slow]

Good afternoon All! someone roast me already & post the link. I'm looking for the step by step of installing flex fuel kit for E85. I Found the thread months ago & cannot find it now, searched the forums here & tried base searching via google. I'm about to install my full kit & I know it would be handy to have that guide rather than asking a million questions when the time of installation arrives next week. (I will be attempting to install, innovative Alcohol content gauge, GM flex fuel sensor & pigtail) Thank you in advance!

 

[Dr-Evil]

Just call me when all of your stuff comes in, I can't imagine any part of this is going to be difficult. It'll either work fine or not work at all!

 

[AWD-Tony]

It’s easier than doing a brake job . Put it between fpr and hard return. Not sure what size the return is on a 2g but the GM sensor is 3/8 and 1g return is the next size down so I had to use a 3/8 hose with 3/8 fuel clamps. It holds fine. Connector from link is just two wires to the maf sd connector and one to ground.

 

[Vegas Smith]

http://www.ecmtuning.com/wiki/ethanolsupport

 

[TSI_too_slow]

@Vegas Smith Thanks Buddy! Thanks for the responses guys. ill post back if I run into any issue in
the process. All Parts are here. will probably install this week, hopefully meet my deadline for getting it tuned next week.

 

[TSI_too_slow]

@Dr-Evil Check out the Link Vegas posted. That's the step by step. let me know your thoughts on it. Im going to try & install Thursday night.

 

[Dr-Evil]

@TSI_too_slow looks to be a pretty simple install, I'm down to come help after work!