2G 97 GS Spyder 2.4L Oil Pan bolts

[aidanbruesch]

I have a 1997 GS Spyder with a 2.4L engine and I am strugling to remove the oil pan.

I have the downpipe and cat removed from the header and am strugling to reach one specific bolt. What looks like the bell housing, is in the way and blocks me from having enough clearance to reach the bolt.

I have seen that the drivers side axle has been a problem for others but that is not the case here.

There are labeled pictures included below.

Blue arrow points to what I think is the bellhousing and bellhousing cover
Green arrow points to the bolt I am having trouble reaching

Please let me know if more pictures or more information is required

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[jdxnc]

Remove the inspection cover off the transmission and use a wobble extension to get that last bolt.

 

[aidanbruesch]

Remove the inspection cover off the transmission and use a wobble extension to get that last bolt.

Yep, was able to fit the socket in there with a wobble extension just like you said. Thanks!