90 oil filter housing help

[dwdsm]

I've searched and I cannot find the answer I'm looking for. What size is the hole and pitch for the inlet/outlet to run an oil cooler on a 90 filter housing? I'm trying to find a male to 1/2 barb fitting to run the B&M supercooler I purchased. will an -8 AN fitting go in there? 3/8 NPT?

Thanks,

 

[TealTalon]

The bolt holes in the housing are M16X1.5 as far as I know.

http://www.dsmtuners.com/forums/showpost.php?p=1188143&postcount=21

http://www.holley.com/9919EFJERL.asp

http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-9919EFJERL&N=700+115&autoview=sku

Someone please verify for me. I am not 100% positive. Looking for the same answer.

 

[dwdsm]

Does anyone make a M16X1.5 to barb end fitting?

 

[Burnett03]

Does anyone make a M16X1.5 to barb end fitting?

you dont want to run barbed fittings with oil pressure lines.. please only run an lines. you dont want one blowing off under pressure.

 

[dwdsm]

I guess I should ask if barb ends will hold up under the oil pressure? But I don't see why not. Anyone with experience.

 

[dwdsm]

push lock style hoses hold up to 250 PSI according to summit racing. So I found all the fittings I need thru summit. it's 16mx1.5 to 8-an and a female 8-an to barb.
thanks,

 

[DSM_Roller]

i'm running push lock fittings. I added hose clamps for piece of mind.

 

[dwdsm]

I'll add hose clamps also. Chris from SBR said that they are fine. I will port out my pressure relief valve I haven't done that and I might as well while it's out of the car.

 

[TealTalon]

So you have verified the M16X1.5?

 

[timloomis]

Yes they are 16mm and 1.5, I just switched to -06 an lines on mine. Both the filter housing and the stock cooler use those fittings.

 

[bp97tsi]

Machv motorsports has these fittings for sale. take a look. http://http://www.machv.com/exoilcoolfil.html

 

[TealTalon]

Yes they are 16mm and 1.5, I just switched to -06 an lines on mine. Both the filter housing and the stock cooler use those fittings.

Perfect thank you.

 

[timloomis]

I got my fittings from summit racing. They were like $6 a peice. If you cant find a plain fitting, the power steering adapters work, just take off the rubber o-ring. Thats what I did instead of waiting a month for backordered russell fittings.