What did you do to your DSM today?

[Xeiros]

Painted the stock swirlies with some black Plasti Dip paint, and hit the calipers with some Red VHT paint. Then I removed the rear wing, and am in the process of filling in the holes. Likely gonna have to weld on some counter weights on the hatch since it'll fly open now without the weight of the wing and wiper assembly.

 

[Blurred Talon]

Painted the stock swirlies with some black Plasti Dip paint, and hit the calipers with some Red VHT paint. Then I removed the rear wing, and am in the process of filling in the holes. Likely gonna have to weld on some counter weights on the hatch since it'll fly open now without the weight of the wing and wiper assembly.

How would it fly open if the latch keeps it down. Not to mention the glass weights more the wing/wiper motor ever would.

 

[DanGST]

Install rebuilt transmission. New brake pads. And painted the valve cover to match the car. And finally installed the black suede headliner. Waiting to reupholster the seats now.

Sent from my PC36100 using Tapatalk

 

[Xeiros]

How would it fly open if the latch keeps it down. Not to mention the glass weights more the wing/wiper motor ever would.

Uh....I'm not talking literally smart guy.



When I hit the latch from the driverside, or unlock it from the rear lock, the hatch will open on it's own VERY VERY rapidly now because the weight of the wing and motor aren't there anymore. It's also more of a bi*** to close now without the weight, so by welding some counter weights on the back, and can get it close to what it was before, so it's a nice SMOOTH open and close.

 

[lex]

I FINALLY finished the electrical part of my popup conversion!

 

[NKYtalontsi23]

I changed the hydraulics for the trunk so i dont have to hold it up with a 2x4 anymore, re-attached my front bumper and cleaned out the interior a bit and promised her tomorrw will be the day she gets her new e316g put in. Hopefully....

 

[zxrider_sa]

Ordered new NGK spark plug wires from Summit to replace my old Magnacores. I really ought to start buying from some of our great supporting vendors, but I have done business with Summit for years and suppose I owe a loyally to them as well.

Sent from my PC36100 using Tapatalk

 

[Spyder4g64]

Took out the tranny and shimmed the DAMN pivot ball.

Smooth sailing now

 

[vertGST]

1) Cleaned and finished painting the brakes
2) Finished converting over to full black interior.
3) Finished repairing front bumper.
4) Went car shopping again at Lowe's and Home depot for most of the stuff.
5) Polished the intercooler.

 

[dsmdeliveryboy]

1)Dropped my downpipe
2)Pulled the axles
3)Pulled the transfercase
4)Next is dropped the trans and putting my new one in.

 

[LiquidX]

Started off by wiping off a large, and I mean LARGE splat of bird poo off of my driver head light. It managed to get behind it under the fender too...

After that, I removed the turbo and manifold assembly to wrap both the FP manifold and o2 housing. Then I installed a used OEM alternator to replace the failing Autozone one. Ended up breaking the handle off of the dipstick so I had to epoxy it back on too. That's about it for today.

 

[donniekak]

Did the timing belt and spark plugs in the wifes galant, tie rods(inner and outer) in the dsm, pulled the trans in the dsm and installed new 3-4 synchro's/gears/hub & slider. The 91-92 gears sure are tough, but eat synchro's for lunch shifting over 7,000 rom's.

 

[bradselph]

Changed my GS sticker to a GS-T one

also test fit my new o2 housing

then i sat in the driver seat and made loud bov noises wishing it wasnt on jack stands

 

[Trav83]

Finally got some really nice weather today (I live in NY) so I washed, cleaned and waxed it. It always sucks when you haven't cleaned your car for a while and when you do you notice imperfections that weren't there before (mostly from careless a**holes parking next to you I'm sure)

 

[1990AWD]

My injectors, fuel pump, Innovative LC-1, and DSMLink V3 all came today, problem is, I'm too busy seeding to install any of it!! Aaargh!!

 

[Alan11]

Drove it.

Finally got some really nice weather today (I live in NY) so I washed, cleaned and waxed it. It always sucks when you haven't cleaned your car for a while and when you do you notice imperfections that weren't there before (mostly from careless a**holes parking next to you I'm sure)

That's why i always park the further away i can from other cars.

 

[my dreamt dsm]

Idle weird, spark plug was loose, change to fp manifold and get it ready for the track to push the little tsmall before the big 16g goes on.

 

[RogueTalonTSI]

I started mine for the first time since I slung a rod threw the block. dont believe me? Heres proof: YouTube - ‪First start project RogueTSI‬‏

 

[Slow91Laser]

Just bought her some new meats......

You must be logged in to view this image or video.

 

[Trav83]

That's why i always park the further away i can from other cars.

That's always a good idea, but sometimes you don't have that option when it's a crowded parking lot.

 

[brandonwh64]

Cleaned the outside yesterday and fixed my sunroof from leaking after taking off the visor that the previous owner installed

 

[97gst_spyder]

I changed my trans fluid with a mix of Auto Armor. Car shifts better than ever! I can shift at 7-7.5k now!!!

 

[wdawson4]

Didnt do anything today but yesterday during a tuning session I blew the cat out of my exhaust so now I am catless.

 

[skatershawn]

Yesterday i dropped the transmission with the help of another DSMer Today i will be putting a working one on!! Yay to driving my DSM again!!!!!

 

[frostone]

Got rid of those bc280 cams and got some gsc s2 put in son!