AWD-Tony
Proven Member
- 6,801
- 3,735
- Sep 11, 2017
-
Cincinnati,
Ohio
Before today, fuel pressure would hold for at least 30 minutes when car is off.
I swapped out my injectors to Bosch 2200. I removed the resistor pack and wanted to make sure there’s no leaks. I hear the pump prime but I’m not getting pressure reading on my afpr. I plugged the resistor pack back in and still nothing. Bosch injectors are high z and I’m waiting for depin tool so I can combine those wires. What am I missing? I should still see pressure as long as I hear the pump, correct?
I swapped out my injectors to Bosch 2200. I removed the resistor pack and wanted to make sure there’s no leaks. I hear the pump prime but I’m not getting pressure reading on my afpr. I plugged the resistor pack back in and still nothing. Bosch injectors are high z and I’m waiting for depin tool so I can combine those wires. What am I missing? I should still see pressure as long as I hear the pump, correct?
Last edited: