couplers for gm maf

[spic21]

Are these couple good for mounting 3" gm maf after BOV. ive been looking around at different sites and these are 20 plus dollars cheaper than any other i found so if they will work id like to get asap. thanks

 

[99gst_racer]

You forget to post a link?

 

[timm98gst]

i usually get mine here: Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

 

[spic21]

Crap sorry 3.25" to 2.5" Silicone s...

 

[Boomdeeze]

I use the 3" to 2.5" from siliconeintakesystems.com, It takes a little to stretch it over the GM maf but its snug. I would rather do a little more to get it snug, then it to be prone to popping off.

 

[99gst_racer]

Crap sorry 3.25" to 2.5" Silicone s...

Yeah, those will work.

I use the 3" to 2.5" from siliconeintakesystems.com, It takes a little to stretch it over the GM maf but its snug. I would rather do a little more to get it snug, then it to be prone to popping off.

Yeah, I used a 3"-2.5" too. Stretched over nicely.

 

[spic21]

So y'all have had problems with 3.25 popping off. Or is that a precaution so it doesnt

 

[RoasT BeeF]

The size of the maf is 3.25, but a 3" will work. It doesnt really matter either way as long as you're using tbolt clamps its not going to blow off.