2G Car won’t start after throttle body install

[Lilev02]

I just installed a new throttle body on my 99 eclipse fax and now it won’t start or turn over if anyone has any ideas or has felt with this please let me know how to fix it

 

[1990TSIAWDTALON]

Without a car profile I will just guess its a GSX. Did you knock the wire off of the starter, the single blade terminal? It is the signal wire for the starter. Look below and behind the throttle body and you can see the starter. It is a single small wire, not the battery cable.
Marty

 

[AWD-Tony]

Did you plug in the isc connector? It’s crank, no start?

 

[Lilev02]

Without a car profile I will just guess its a GSX. Did you knock the wire off of the starter, the single blade terminal? It is the signal wire for the starter. Look below and behind the throttle body and you can see the starter. It is a single small wire, not the battery cable.
Marty

That did the trick I’ve got power to the car it’ll turn over now but it only whirls up but won’t actually run

 

[T bags]

Tps or mass air flow unplugged?

 

[AWD-Tony]

whirls up but won’t actually run

Can you elaborate or post a video? Now you have a crank, no start?