The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

[email protected], T25, very little mods

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2.2 is horrible for a somewhat-stock AWD turbo car. There are FWD guys out there cutting faster 60's doing a boosted one-wheel-peel out of the hole.

Figure a drag car with a monster turbo can bog the launch and get a 2.2, but a street car with a fairly-responsive turbo should be able to get a 1.8 without breaking a sweat.
 
17psi, dropping to 12 at redline. Log attached (ignore the fuel pressure, bad sender).
 

Attachments

You must be registered for see attachments list
I see :hmm:
So my 2.2 60' time is garbage :cry:
I need some practice if I'm going to try and go for a good time. My goal by the end of this year is going to be a 1.8 for my 60'.

2.2 is what I got in my gst my fourth time ever drag racing. When my car still had the t-25 and stock exhaust with no muffler and greddy upper intercooler elbow and aluminum balancer. On stock boost pressure. Get that 1.8 man :thumbup:
 
2.2 is horrible for a somewhat-stock AWD turbo car. There are FWD guys out there cutting faster 60's doing a boosted one-wheel-peel out of the hole.

Figure a drag car with a monster turbo can bog the launch and get a 2.2, but a street car with a fairly-responsive turbo should be able to get a 1.8 without breaking a sweat.

About the one wheel wonder thing. My car spins both wheels in first gear? Only when I'm spinning in second does it do the one wheel wonder.
 
2.2 is what I got in my gst my fourth time ever drag racing. When my car still had the t-25 and stock exhaust with no muffler and greddy upper intercooler elbow and aluminum balancer. On stock boost pressure. Get that 1.8 man :thumbup:

2.2 is horrible for a somewhat-stock AWD turbo car. There are FWD guys out there cutting faster 60's doing a boosted one-wheel-peel out of the hole.

Figure a drag car with a monster turbo can bog the launch and get a 2.2, but a street car with a fairly-responsive turbo should be able to get a 1.8 without breaking a sweat.

Yeah it was my first time trying. So I think I'm just needed practice. I only practiced launching one time before the track. I don't really like to launch because I'm scared to break something.
 
i am running a stock car too i took mine to the track a couple week ago the car has 3'' down pipe and exhaust and a full 3/4 tank of gas and it went 13.8 60 ft was a 1.9
 
Best pass so far on a t25 no nitrous has been 12.3 at 105mph this is on a 2350lbs 2g no nitrous. and with nitrous is 10.59

damn! What fuel? gst? what 60'? stock suspension? would you mind sharing the log? I guess weight is the biggest factor here...you are an inspiration!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top