Whats wrong with clutch?!

[burnout01134]

Ok guys, I have come to reality and faced the fact that something is wrong somewhere in my clutch. I dont have much money so i'm praying that it's not the ENTIRE clutch that's gone. When I turn the car on, i put the clutch in and turn the key. It takes like 4 or 5 seconds for the car to finally turnover (like the battery is going out). When it's started I can put the car in 1st and let go of the clutch and let it idle and it won't stall out. I press on the gas and it goes nowhere. It does this in all the gears but reverse seems to work the best. It gradually got worse and after 2 days of getting the car it's completely not movable. Is it the clutch or is it the slave cylinder or master cylinder or anything else? If it is the entire clutch, where is a place to get a cheap but good one to replace it with? Any help is MUCH appreciated

 

[Tyeler18]

The clutch has nothing to do with the car not starting well. Your clutch is fried and you need a new clutch kit, judging by your username I'd say you need to lay off on the burnouts.

 

[1G King Koopa]

You need a new clutch...also if you go cheap it'll just keep up with the problems. Do it right the first time

 

[burnout01134]

well where is a good place to buy a clutch at? i guess i'll get oem parts but idk where. i'll probably end up putting it in myself

 

[Brandon Mau]

Just goto a local parts store autozone, car quest, pep boys ect. gonna be all about the same dont get no ebay junk, either oem or an act clutch and having a dsm is all about doing it by yourself thats how you learn when your stuff breaks plus can save you some money but not the headaches !!!

 

[burnout01134]

ok guys,.. thanks for all the help. there goes all my christmas money ):

 

[mezzio]

judging by your username I'd say you need to lay off on the burnouts.

or the drugs

 

[laserspeeddemon]

Fill out your info. I have no idea what model you have.

 

[D00kie]

Your clutch is gone..... no ebay stuff! Go OEM

 

[Below Ambient]

get an ACT 2600 with OEM throwout bearing, resurface flywheel to spec (check vfaq)and be done with it... you'll thank me later... stay away from centerforce

 

[curt-s]

An ACT2600 kit for a 96 N/T? A little overkill.