DynastyLCD
15+ Year Contributor
- 50
- 2
- Jun 17, 2006
-
Harwinton,
Connecticut
i tried searching all over with no luck. i have seen threads on other boards and on here throughout the years (pre V3) of people running the HKS VPC/GCC combo with DSMlink v2.5. my setup utilizes a VPC/GCC and 660 chip with 680's. i love the way the car drives, and i cant currently afford to upgrade to V3 and buy all the sensors to do the SD setup right. but i did recently purchase v2.5 from a friend.
long story short, im searching for others who have used this combo, their thoughts and opinions, and also how to set it up. when i look at the initial maf reading, it only lets me select 1g, 2g, or vr4. what should i use for the VPC? any other things i should know about? im knowledgable with tuning, i can figure out how to fine tune it. its more or less the initial setup id like to get straightened out to make sure the basics are in line. thanks for the help!
long story short, im searching for others who have used this combo, their thoughts and opinions, and also how to set it up. when i look at the initial maf reading, it only lets me select 1g, 2g, or vr4. what should i use for the VPC? any other things i should know about? im knowledgable with tuning, i can figure out how to fine tune it. its more or less the initial setup id like to get straightened out to make sure the basics are in line. thanks for the help!
