Post your 1g install pics

[93jdmlaser]

I searched for pics of 1g install and only found a few. Theres alot of 2gs pics but none for the 1g guys. I just got my wet kit and I want to know where everyone else with a 1g mounted their bottle and solenoids. Ill post up when mines done. Thanks

 

[93jdmlaser]

Got the bottle mounted. Now I got to find where I wanna put the soleniods. 1g guys post up where you put your setup. Thanks. More pics to come.

 

[RedAssassin]

Mine is a really crappy setup. I just wanted to get it installed then I cleaned it up a bunch.

Bottle Mounted in the back like everyone else.

You must be logged in to view this image or video.

Here is the line comming out of the back. I ran it through the drain plug and then zip tied it to the fuel lines. NX instructions actually recommend this.

You must be logged in to view this image or video.

Here's the shark nozzle going into my Intake. 4-6 inches from the TB. Yes I have duct tape on my intake tube. I need a new, better one.

You must be logged in to view this image or video.

Here's the fuel line I cut to splice into.

You must be logged in to view this image or video.

Here's the T fitting going to my injectors and my fuel selnoid for the nitrous. I really dont like this.

You must be logged in to view this image or video.

Heres the selenoids just kinda resting on top of everything. Needs cleaned up, but it works.

You must be logged in to view this image or video.

 

[Burnett03]

just got my bottle done

 

[Burnett03]

Mine is a really crappy setup. I just wanted to get it installed then I cleaned it up a bunch.

Bottle Mounted in the back like everyone else.

You must be logged in to view this image or video.

Here is the line comming out of the back. I ran it through the drain plug and then zip tied it to the fuel lines. NX instructions actually recommend this.

You must be logged in to view this image or video.

Here's the shark nozzle going into my Intake. 4-6 inches from the TB. Yes I have duct tape on my intake tube. I need a new, better one.

You must be logged in to view this image or video.

Here's the fuel line I cut to splice into.

You must be logged in to view this image or video.

Here's the T fitting going to my injectors and my fuel selnoid for the nitrous. I really dont like this.

You must be logged in to view this image or video.

Heres the selenoids just kinda resting on top of everything. Needs cleaned up, but it works.

You must be logged in to view this image or video.

looks like you cut the line after the regulator (ie the return) thats a no-no

 

[talon_boy69]

YOU'RE RIGHT! you just have a wet looking dry setup

 

[RedAssassin]

Impossible, I know for a fact I'm getting a mixture of fuel and nitrous. When I first used the kit I had the nitrous line over tightened onto the nitrous solenoid. So when I sprayed I got no nitrous and all fuel and it flooded the engine. Can you show me pictures of where you have yours spliced? I'd rather be a little more certain.

Thanks

 

[talon_boy69]

I don't have pics but mine is on the FPR(aeromotive)...

 

[raped]

Impossible, I know for a fact I'm getting a mixture of fuel and nitrous. When I first used the kit I had the nitrous line over tightened onto the nitrous solenoid. So when I sprayed I got no nitrous and all fuel and it flooded the engine. Can you show me pictures of where you have yours spliced? I'd rather be a little more certain.

Thanks

he is right you tapped into the return line, you need to tap into the feed line.

 

[Goobdog]

I posted the install on my other car before but heres the install on the car im driving now.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Ignore my fuel line I havent gotten around to moving it yet.

 

[DiamondStarM]

wow, i had no idea how many juiced dsms there are, are these daily drivers?

 

[Goobdog]

I drive mine everyday, im spraying 150

 

[starion4g63]

here you go. cant see it under the intake. i made the distribution blocks myself.

 

[Boosted98gsx]

i like that setup starion. Very sneaky. My idea of the perfect nitrous system.

 

[starion4g63]

thanks here is some more

 

[starion4g63]

all the selonoids are in the wiper galley

 

[Boosted98gsx]

that is freaking awesome. Where is your intake going?

 

[starion4g63]

it just points down in front of the trans with a 12inch k&n

 

[Boosted98gsx]

you need to get that valve cover chromed or polished or something, really makes that incredibly clean engine bay look dirty.

 

[starion4g63]

actually it looks good in person. it is powder coated with flake in it. i have had a polished cover on it but it didnt look right. this is just my dirty little street/track car no show and go.

 

[Boosted98gsx]

OH, , i thought it was just a dirty valve cover, i didn't look close. Yea, that does look good.

 

[hairybeanbag]

90 GST

Eary pics last summer, single fogger wet, 50 shot.

 

[Irrational]

thanks here is some more

DUDE i just nutted in my paints thats the cleanist dsm engine bay EVER. I'm from Jersey and so are you it was ment to be now go get me a ring!!!!

 

[starion4g63]

Thanks man. The car just got a bigger turbo and will be at Imp for dyno day on 3-1-06. If the weather is good I might go tune it tonight. Hope the new turbo works without the juice,but if it doesnt its jetted for 100hp and ready to go.

 

[paper_clip_boy]

Does anyone have pictures of a hidden install. Im thinking if going with a direct port kit and running a 150 shot on a built 2.3L engine and GT35R and controlled by EMS.

The problem I run into is that everything must be hidden because here in Canada, Nitrous is illegal on a street car. I was thinking of cutting a big section of foam from the back seat cushion and then cutting the sheet metal and creating a box that would sit lower. Running the nitrous under everything. The problem I run into is the engine bay. How would I make it so that NOTHING shows.

If anyone has any pictures it would be extremely helpful, along with any advice.