Innovate LC-2 Equation for Logging w/ ECU?

[pointblank9957]

Hey guys, I'm kind of confused on what to use as the formula for my wideband. I'm logging with evoscan, and have the brown wire (.1v-1.1v) connected to my rear o2 sensor signal wire so I can log directly into the ECU without an external cable. I have the correct data request ID (3C), and also the equation for 1v-5v (Yellow wire) logging. Anyone have ideas?

Innovate widebands can be programmed to output .1-1.1v or 1-5v on either of their channels correct? I can program the controller to output 1-5v through the brown wire also, which might make things easier.

I've tried:
(.1/7.35)/x
.01360544/x

 

[Kevin Jewer]

Neither of those look right. Normally it's the voltage times some number, plus another one. Googling the first half of your thread title returned this link, which has some examples.

http://www.innovatemotorsports.com/resources/Xcal2_tutorial2.php

 

[pointblank9957]

Neither of those look right. Normally it's the voltage times some number, plus another one. Googling the first half of your thread title returned this link, which has some examples.

http://www.innovatemotorsports.com/resources/Xcal2_tutorial2.php

thanks for the link! i'll have to change the output of analog 2 to 0-5v and use one of the basic equations