pointblank9957
10+ Year Contributor
- 284
- 8
- Jul 12, 2012
-
Sheboygan,
Wisconsin
Hey guys, I'm kind of confused on what to use as the formula for my wideband. I'm logging with evoscan, and have the brown wire (.1v-1.1v) connected to my rear o2 sensor signal wire so I can log directly into the ECU without an external cable. I have the correct data request ID (3C), and also the equation for 1v-5v (Yellow wire) logging. Anyone have ideas?
Innovate widebands can be programmed to output .1-1.1v or 1-5v on either of their channels correct? I can program the controller to output 1-5v through the brown wire also, which might make things easier.
I've tried:
(.1/7.35)/x
.01360544/x
Innovate widebands can be programmed to output .1-1.1v or 1-5v on either of their channels correct? I can program the controller to output 1-5v through the brown wire also, which might make things easier.
I've tried:
(.1/7.35)/x
.01360544/x
Last edited: