Fuel pump hanger welded jic fitting plus walbro outlet adapter

[jw4free]

Apologize if this has been covered already.

For the gsx pump hanger, can a person weld in this fitting:

2406-06-06​

Female JIC x Male JIC Adapter​

Hose and Fittings.com

Hoseandfittings.com is World's largest online shop supplying Industrial Hose, Ball Valve, Quick Coupler, Brass Fittings, Hydraulic Hose, Fule Hose & Steel Fittings.

shop.hoseandfittings.com

And install the pump threaded into the female end with the Radium outlet adapter:

Radium Walbro E85 Fuel Pump Outlet Adapter (20-0298)​

Radium Walbro E85 Fuel Pump Outlet Adapter (20-0298)

Used to convert the hose-barbed outlet of many fuel pumps to -6AN male. The two billet aluminum adapter halves are secured together with stainless steel bolts that clamp tightly around the pump outlet. A stainless steel retainer and Viton O-ring seal for a leak free connection. All components...

stmtuned.com

If it’s possible, is there enough clearance for the height of the walbro 450?

 

[NWHTanK]

If this is going in the tank what is going to seal it against the fuel sender?

 

[jw4free]

Jic is welded with male out and female inside tank /(underside) of pump hanger.

 

[TerminalTalon]

Are you trying to put a Walbro in the tank with the stock hanger?

 

[jw4free]

Like the attached second photo:

To eliminate the hose inside the tank.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[jdxnc]

You don't need to weld anything, just buy the screw in bulkhead fitting:

RTM Racing :: MITSUBISHI / EAGLE :: DSM: 2g (1995-99) :: Fuel :: Fuel Pumps :: Bulkhead Fitting for Fuel Pump Sending Unit Repair