Resolved 2G Is my power steering belt incorrect?

[Mahreeoh17]

The part listed on the belt is what I keep finding. However this belt is WAYYYYY too long for my power steering pump pulley and the spacer behind the water pump. Did I miss something? 6 bolt block, 2G PS pump and bracket.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[pauleyman]

Wrong belt. Looks like you bought the non turbo belt. Totally different motor.
Dayco part is 5040274
695mm

 

[chrysler kid]

That’s the wrong belt, but are you using a 2g water pump pulley or a 1g pump pulley.

Belt should be a 274k4 for a 2g turbo Dsm

390k4 for the alternator

I have had a second gen with a bent ps bracket, so if the factory size is still too loose check the bracket to make sure it’s not bent

 

[pauleyman]

That’s the wrong belt, but are you using a 2g water pump pulley or a 1g pump pulley.

Belt should be a 274k4 for a 2g turbo Dsm

390k4 for the alternator

I have had a second gen with a bent ps bracket, so if the factory size is still too loose check the bracket to make sure it’s not bent

Doesn't a 1g use a vbelt? So it has to be a 2g pulley.

 

[chrysler kid]

Doesn't a 1g use a vbelt? So it has to be a 2g pulley.

I genuinely have no idea, I haven’t seen a first gen in ten years, the water pump pulley just looks smaller

 

[19Eclipse90]

Yes, 1G power steering pump uses a v-belt.

 

[pauleyman]

I genuinely have no idea, I haven’t seen a first gen in ten years, the water pump pulley just looks smaller

It looks like only one pulley is present on the water pump when there should be two.

 

[Mahreeoh17]

It looks like only one pulley is present on the water pump when there should be two.

Sorry this was just a test fit for the PS. I have the water pump pulley, just set aside. The first reply to this thread was correct and I've ordered the new belt. Thank you all for the help.