keltalon
Supporting VIP
- 3,474
- 959
- Jun 29, 2003
-
Luthersville Ga, Atlanta,
Georgia
Well fellas I am, after building my engine, I am in need of an upgraded transmission for the fwd unit. I have been doing a lot of research , Talking to a lot of people and have decided, after breaking several transmission in the past, the one in the car now is good but will definitely need to be upgraded from stock. Therefore I am going to do the transmission build myself This will be couple with TRE and a shop here in atlanta. The process will include:
1- Taking all the individual gears to- REM Gear Polishing, Atlanta so they can be cryo treated, micro polished and then shot peened. jack's transmission speaks of this process at length
Gear Work and Strengthening – Jacks Transmissions LLC
I am just happy to have the shop who does it here in atlanta.
2-Sending the units to jon for synchro upgrade and assembly of the clusters to specs. The transmission case will also be cleaned, glass beaded and coated
REM Gear Polishing, Atlanta
2-next I will build my own trans with all the upgrades
This should hold my 600-650hp goals I will keep this thread updated with pics as they come in.
1- Taking all the individual gears to- REM Gear Polishing, Atlanta so they can be cryo treated, micro polished and then shot peened. jack's transmission speaks of this process at length
Gear Work and Strengthening – Jacks Transmissions LLC
I am just happy to have the shop who does it here in atlanta.
2-Sending the units to jon for synchro upgrade and assembly of the clusters to specs. The transmission case will also be cleaned, glass beaded and coated
REM Gear Polishing, Atlanta
2-next I will build my own trans with all the upgrades
This should hold my 600-650hp goals I will keep this thread updated with pics as they come in.
Last edited: