Time to pick a turbo

[bagged420a]

Its that time for me to pick a new turbo. I am looking into a PTE turbo, but not sure wich model to choose. The three models I'm looking into are the SC44, SC52, and SC60 series(all internally gated). The goals for the car are 375-400whp on pump gas and a stock head. This is my DD so I would like to see full boost by 3500-4000RPMs. I'm not a wiz at reading all the turbo specs, I kinda get it but would really like some input from you all. Sorry for the long posts, and thanks in advance.

EDIT: or point me in the direction of a good 20g to meet my goals.

 

[NB4G63T]

SBR G50 good street turbo and will get you to your goal.
Slowboy Racing, Inc. :: Mitsubishi :: DSM :: Turbos :: SBR-G50
Guy on link is selling one for 575ish, it's pretty much new FYI.
My 2psi.

 

[bagged420a]

SBR G50 good street turbo and will get you to your goal.
Slowboy Racing, Inc. :: Mitsubishi :: DSM :: Turbos :: SBR-G50
Guy on link is selling one for 575ish, it's pretty much new FYI.
My 2psi.

On SBR's site it says its capable of 400hp. But is that referring to crank hp or to the wheel?

 

[NB4G63T]

On SBR's site it says its capable of 400hp. But is that referring to crank hp or to the wheel?

I put down 435awhp with my green and it's a 50trim, 48Lbs\min. I'm not sure the Lbs\min on the G50 but it should be close.

 

[Hcaruso4]

i would highly reccomend a mitsu 20g or even a frank 20g which i have seen for sale in the 4G63 classifieds section on this site recently. I have had personal experience with these turbos and know that they spool in the range you desire and will make the power you desire

 

[bagged420a]

What are the thoughts of the AGP 3147 turbo, It flows 47lbs/min. Or the PTE SC34, the wheel trim is 57? Do you think these turbos will spool withing the 3500-4000 range?