profec b type-s problem

[YoYo_4G63]

Well i can't make high boost at low or high settings. It only makes what the tial spring rate is (15psi). I've got all the vacuum hoses connected fine, my boost source from the turbo housing etc as per instructions

You must be logged in to view this image or video.

 

[dsmgst1996]

You need to turn off over boost conditions on dip switches.

 

[YoYo_4G63]

How i do that?

 

[dsmgst1996]

1 off 2,3 on 4 off. up is off down is on.

 

[YoYo_4G63]

Well my type s doesn't have that, do i ned to open it?

 

[dsmgst1996]

Your right the type s does not have dip switches and what you are describing is not controling the boost at all. are you sure you have power going to your actuator and a good ground ?

 

[YoYo_4G63]

Do you know if the solenoid have power all the time, when the main unit is ON? I'll check on that tomorow. Thanks

 

[dsmgst1996]

I use the profect b similar in style mine has to wires running from the control box i assume its a pulse like the factory silinoid.