The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

New thought on an auto build.(Need Opinions)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tsd123

15+ Year Contributor
135
1
Aug 9, 2006
Hickory, North Carolina
I have two awd Talons right now. I have one that runs, and one I just got with no engine. I'm planning on swapping motor and trans into the 91 I just got. Along with my struts, and springs. They are both 5 speed cars, and the body I'm taking all my stuff out of is a bit rusted. It needs body work. I'm thinking about taking every salvageable part off the 90, and keeping it all in case I need spare parts. Then buying a trunk type fox body, and finishing the build on my spare motor for it. I would be using a th350 or 400 with a shift kit, and stall. The fords 8.8 would be fine besides posi unit, and deciding on the gear ratio. I just want some thoughts on this.
 
fox's are proven to do amazing with pretty much any engine with the proper setup. DO IT
 
i slapped a LS vette hybrid motor that ran mid 10s using all stock LS parts.. the only thing that wasnt stock was the pistons and cam becuase when i bought the motor one of the cylinders where scratched up pretty bad and they didnt make a cam big enough for what i needed.. i would live seeing an old awd fox body DSM...
 
Yeah it will be rear wheel drive. It will be a while before I get to start on it. I'll be looking for a body this year. I have to finish my Chevelle before I start on a new project. The only thing I'm not sure of is the oil pan.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top