MHI Evo 3 16g what turbine housing?

[Maes]

I've been researching to try and find a turbine housing for my turbo i picked up locally. I didnt get the turbine housing obviously. I've seen a couple sellers such as turbo lab of anerica have housings on ebay i dont know how good they are though. Can anyone point me in a good direction for a turbine housing. Very much appreciated

 

[Dsmkauai]

Look in classifieds for a evo3 16g turbine housing. That's where I found mine. Or buy one for FP they have a nice 8cm housing.
http://www.dsmtuners.com/threads/nice-2g-shell-bolt-ons-oem-6-bolt-parts-more.490876/#post-153501668

 

[fredom dsm]

Look in classifieds for a evo3 16g turbine housing. That's where I found mine. Or buy one for FP they have a nice 8cm housing.
http://www.dsmtuners.com/threads/nice-2g-shell-bolt-ons-oem-6-bolt-parts-more.490876/#post-153501668

I don't think FP sales the 8cm housing any more, they just use them for their own turbos. Someone please correct me if I'm wrong.

Maes, Dsmkauai, is right. look on the classifieds it will be the cheaper rout.

 

[Maes]

Yeah fp doesn't sell them.

 

[JusMX141]

7cm2 housing.

6cm2 is too small and will cause the already-instant-spooling Evo III to surge...and the 8cm2 housing will add more lag than necessary for the compressor to perform.

 

[Maes]

Thanks

7cm2 housing.

6cm2 is too small and will cause the already-instant-spooling Evo III to surge...and the 8cm2 housing will add more lag than necessary for the compressor to perform.

Thank you Jusmx. I would like to find a new one if that is possible. Would anyone know where to get a new one from a reputable source?

 

[gofer]

TD05 Hotside

 

[JusMX141]

^ That's the only one you're going to find that will bolt right on and use the stock actuator with all stock mounting hardware.

New Genuine Mitsubishi housings have dried up entirely.

 

[BostonGST]

8cm housing definitely wouldn't be good? Any advantage in hp or top end because of more airflow?

 

[Maes]

Thanks you guys for your help

 

[AllanL]

this has worked for me and another car...http://www.ebay.com/itm/7cm-32mm-Fl...Parts_Accessories&hash=item19f71377f0&vxp=mtr

 

[Maes]

this has worked for me and another car...http://www.ebay.com/itm/7cm-32mm-Fl...Parts_Accessories&hash=item19f71377f0&vxp=mtr

Thank you that is the one I decided to go with

 

[4gfun]

Is that housing any better than 7cm2 housing that comes on an E316g? I have a spare one laying around. Wondering if it is worth my time swapping it out vs the 7cm2 housing that is already on my Laser's E316g?

 

[Maes]

Not sure this is my first one. I haven't installed it yet. The quality looks really good

 

[4gfun]

I have one setup for external gate already on my GVR-4, but never really stopped to think about it since I moved from s16g to e316g (with that housing installed) all at once.