eBay Evo 3 Turbine Housing

[Blurred Talon]

I need to replace my MHI Evo 3 16G Turbine housing because it's set up for external gate, I'm not quite ready to run one. I came across an housing on eBay: Turbine Housing 7cm 34mm Flapper EVO 1~3 DSM 1G TD05H | eBay

Anyone have any experience with these housings?
I've read some mixed reviews.

 

[97gst_spyder]

I've been talking to that company for awhile now. I have there water lines, and my buddy got a turbine wheel from them. All were great and quality.

So I'd assume that the turbine housing would be good also, but I've never seen theirs.

 

[agentorange313]

I have bought one of these and I am using it. Its a great housing, the only thing is that the wastegate flapper arm elbow does not match up with the stock wastegate, there is little modifying.

 

[ed1380]

Here's a thread about it
http://www.dsmtuners.com/forums/tur...3-turbine-housing-swap-b16g-any-benefits.html

 

[4Lurker4]

http://www.dsmtuners.com/forums/tur...-ebay-replacement-turbine-housing-issues.html

http://www.dsmtuners.com/forums/art...1680-china-ebay-7cm-td05-turbine-housing.html

It's a hit or miss in most cases. Plus they don't come with a locating pin on the housing.

 

[JusMX141]

Same pre-ported turbine housing that was used on the FP 18G-6SL2 and GT Concepts Evo III....some users had great luck with them, but I have seen quite a few of these develop large cracks within a very short period of time.

For that much money you might as well buy a MHI Evo III turbine housing which does not crack.

Mitsubishi Evo TD05H 7cm2 Turbine Housing - Turbochargers.com

 

[Blurred Talon]

Thanks guys.
I'm likely gonna go with the OEM one via Turbochargers.com.