In the market for a new rad gt35r inlet issue?

[DOHCTA]

Hey tuners,

I'm in the market for a new aluminum rad that will accomodate my gt35r set up. I plan to run a 4" intake (SD) and I'd like to know if I can find a radiator that moves the inlet hose further left (passenger side) as opposed to directly in the middle (close to exhaust mani) so I can avoid having to frequently replace the inlet hose from hot exhaust temps.

So my question is;

Who makes one?
Prices?
Hose kits that accompany this mod?

Or is this something I'll have to cut and weld?

Thanks guys, as always, I appreciate your help.

-DOHCTA

 

[99gst_racer]

Best solution: 1G Mishimoto radiator. It's inlet is moved over a few inches and is dimensionally the same otherwise.

PIC:

You must be logged in to view this image or video.

 

[DOHCTA]

Awesome!! Thanks a lot man!

I pm'd you

 

[DOHCeclipse]

Aren't the little mounting tabs or pins or whatever on the bottom in a different spot on a 1g radiator when compared to a 2g? I guess you could cut them off and reweld them...or maybe I'm mistaken?

 

[99gst_racer]

^^^ Correct. Cut them off and re-weld them over a bit. That's the only bit of work required.

 

[tkrPerformance]

also have a 1g fluidyne rad in my car

You must be logged in to view this image or video.