The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Hid

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bomper04

15+ Year Contributor
256
0
Jan 21, 2008
Berkeley, California
So I understand that HID plug and play units are illegal but I bought some anyways for offroad use...:thumb: so when I finished and tried it, only one would work while the other one wouldn't. So I thought it was the bulb and ballast so I switched it from that side to the other and it wasn't the bulb or the ballast because it was lighting up just fine. So what's the deal? why can't I get them both to work?

one more thing to add, the OEM headlight works but the HID doesn't..weird. please help!
 
Contact sharphid.com as they're giving away free slim ballasts with their economy kits right now.
 
I'm having a similar problem with my HIDs. I had the HIDs working fine. Then I did the 97 headlight swap and I re-soldered the wiring inside. Put the HIDs back in and nothing. I tried two different kits and one was from SharpHID.com. Put the halogen bulbs back in and work perfectly fine. Tried all kinds of combos and I've done other plug and play kits with no problems. Anyone have an idea?
 
I'm having a similar problem with my HIDs. I had the HIDs working fine. Then I did the 97 headlight swap and I re-soldered the wiring inside. Put the HIDs back in and nothing. I tried two different kits and one was from SharpHID.com. Put the halogen bulbs back in and work perfectly fine. Tried all kinds of combos and I've done other plug and play kits with no problems. Anyone have an idea?

The only possibility is that the ballasts arent getting power. Are they wired to the battery properly? Of so, can you hear them "hum" when you turn the lights on? If so, the lights should come on.
 
hids will blink or not come on if the voltage is NOT between 12.7-13.2. Try revving your motor to 2K rpms and turn the headlights on and see if they blink or come on at all. If they blink, try reversing the polarity. If that doesnt work, I'd contact the company you bought them from. I have plug and plays that my wife bought me for $55 off ebay and they work flawlessly as long as the voltage is correct in the car.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g NOS Sebring/Avenger floor mats
    These are slightly different shape than 2G mats but very close. NOS and still in plastic wrap. I...
    • MindBlowin03
    • Updated:
    • Expires
  • Wanted 2g Anyone parting out a 2G?
    Need a few bolts that I'm missing for the rebuild, subframe and crossmember specific. Anyone...
    • Mahreeoh17
    • Updated:
    • Expires
  • For sale 4G63 Mitsubishi # 284K00708 tach filter
    Mitsubishi OEM tach filter. With weather pack connector. Message 702-741-6987.
    • Galant665
    • Updated:
    • Expires
  • For sale 1g NEW ETS Street Intercooler for 1G DSM ( 4” Core )
    NEW ETS Street Intercooler for 1G DSM ( 4” Core ) $475 + shipping & paypal fees* these are...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2g power window motors. OEM
    2g RH and LH power window motors OEM, $30 each. Sold the drivers and pass set of door switches...
    • Galant665
    • Updated:
    • Expires
Back
Top