help please throttle body plate placement

[97ebaygst]

i am in the middle of replacing my throttle body o-rings and I goofed up. When I took out my throttle plate I didn't mark it. does anyone know how it goes back in?

 

[snowborder714]

There should be two small lines on one side, each about 1/4" long. They both go above the shaft and towards the throttle body elbow. It's been a while since I've had a 2g in my hand, but I'm pretty sure they're the same way as 1g's.

 

[97ebaygst]

There should be two small lines on one side, each about 1/4" long. They both go above the shaft and towards the throttle body elbow. It's been a while since I've had a 2g in my hand, but I'm pretty sure they're the same way as 1g's.

forgive my stupidness but what side is the elbow?

 

[BLINKY619]

any pictures

 

[snowborder714]

On a 2g throttle body, the side the nipples don't face. Or the side that the ISC is on.

 

[97ebaygst]

On a 2g throttle body, the side the nipples don't face. Or the side that the ISC is on.

so r u saying the screws would come out of the back on the side of the intake manifold?

 

[snowborder714]

No, the screws should be removed from the elbow side.

 

[97ebaygst]

ok got it thank you. I gotta say man i've read alot of your post and you know your s*it. thanks again