The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

grinding noise???????

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

#960vr4

Probationary Member
27
0
Nov 13, 2011
atl, Georgia
hey guys i was driving my vr4 yesterday and acclerated hard in first gear and heard a loud pop. the car then just revved like clutch was slipping in 2nd gear so i let out of it and brought the rpms back down and shifted to 3rd and car drove ok but everytime i start off from a dead stop the car makes a grinding noise while im letting clutch out to get goin and then it stops grinding and slips again in first and second under any kind of load but if i do give it any kind of load u can hear the grinding noise again and clutch slips again could this just be a bad clutch or could it possibly be something else car still shifts fine and goes into gear like normal thanks for the help.
 
Yea i am sure the clutch disc is on its last leg. The clutch material is probably almost all gone and the metal center is riding against the pressure plate and flywheel, making the grinding noise.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top