2G Engine rebuild

[1k95gsx]

So i just rebuilt my engine with eagle rods and weisco pistons. I do have 2 eprom ecu but lost the dsm link and cant find anyone in soith fl to tune it.

My questions are as follows. Should i get a stock rebuilt tourqe convertor for 300 or a racing stall convertor for 500? I have a t3 t4 turbo what size injectors should i buy? And if i put it together with stock injectors can i turn the turbo down and drive it with stock tune till i can get larger injectors (what size should i get 750 or 1000?) And someone to tune it

 

[PlanZero]

If you don't have link or another way to tune do not run bigger injectors. Not sure what brand stall converter; if its generic go with the rebuilt stocker. And you can run pretty much any size turbo on stock boost and injectors

 

[1k95gsx]

It would be a rebuilt from fl tourqe converters either way i go they have a slightly better than stock or a racing stall convertor. thinking about selling it after i finish and drive it for a while. Is there anyone that can program an eprom ecu without the car? I think i will go stock boost and injectors till its going on the dyno for tuning.