The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Destroyed Valves???

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Well guys dropped the tranny! It was a PITA but shimmed the pivot ball I put 2 thin washers on the pivot ball and now the fork hits the PP right before the halfway point if not right on the halfway point! I cannot push the fork past the halfway mark by hand so I'm pretty sure problem was solved :)
 
Well guys dropped the tranny! It was a PITA but shimmed the pivot ball I put 2 thin washers on the pivot ball and now the fork hits the PP right before the halfway point if not right on the halfway point! I cannot push the fork past the halfway mark by hand so I'm pretty sure problem was solved :)

IF the fork is stopping at the halfway point now, then you should be good to go :rocks:

And FWIW, my definition of "Massively wrong" is anything that requires pulling a transmission or engine to make right LOL
 
IF the fork is stopping at the halfway point now, then you should be good to go :rocks:

And FWIW, my definition of "Massively wrong" is anything that requires pulling a transmission or engine to make right LOL

Lol it's all good! I understand! It was a pain to go through it all again just for the stupid pivot ball!!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top