Cometic headgasket sizing for 0.020 over?

[BLAKSUNSHINE]

I purchased a Cometic headgasket a few years back, which I remember is a 85.5mm gasket. I rebuilt my motor with 0.020 over Arias pistons. In researching the sizing after installing the 85.5mm gasket, every where I looked shows the 85.5mm as for standard pistons and the 86mm for 0.020 over.

As I remembered the 85.5mm gasket cleared the bore sizing by at least a 16th of a inch all around and the motor turns freely. Do you think in the future I will have problems or should I switch to an 86mm gasket?

Thanks for the help!

 

[ramsack]

The gasket will likely compress and squish a little towards the cylinders, hence that gap. I would just go with the 0.020" over one/86mm and be safe.

 

[Fehrion_sit]

the gasket that is made for .020 over has the sizing built into the gasket, it will squish toward the cylinder but should not be a problem.