Clutch fork position advice

[Wrathvr4]

Chasing some sound advice on the position of my fork, should it be more towards the engine?. Just installed competition clutch fork with pivot, new throw out. Have shimmed the pivot also. Pic attached.

You must be logged in to view this image or video.

 

[Mello]

I would shim it a little more, may be another .03" thick washer. Strange though, you are new fork, pivot ball, & TOB & still need to add shims?

 

[Wrathvr4]

I would shim it a little more, may be another .03" thick washer. Strange though, you are new fork, pivot ball, & TOB & still need to add shims?

Sorry I should have added I’m running a DCS twin plate clutch. Almost always need to shim when running these

 

[habitatguy187]

Idk about twin discs, but it looks TOO shimmed to me. I did that once and it caused the fork to contact the pressure plate cover grinding it down and making a screeching noise.

 

[curt-s]

looks about the same as mine (also a comp forged fork), but I'm on a regular clutch setup.
Seems to shift fine..
I'd do a drag test before shimming more.