Brian Crower 272/272 Cams

[mini zilo]

I am just looking for some additional information on these cams. I just ordered them and would like some opinions on them, what they are good for, etc. Would you recommend them? Thanks, I started this thread because I couldn't fine any good info on these cams when searching.

 

[poonman]

I am just looking for some additional information on these cams. I just ordered them and would like some opinions on them, what they are good for, etc. Would you recommend them? Thanks, I started this thread because I couldn't fine any good info on these cams when searching.

http://www.crower.com/cat/import/mitsu/cams/camshafts.shtml
This is the info for your cams, they are stage 2

 

[Locke]

Good effort Poonman, except Brian Crower and Crower are two different companies. http://www.briancrower.com/makes/mitsubishi/4g63.shtml

Sorry Joe, no specific opinions on BC272's from me.

 

[poonman]

i wouldnt think the specs would be to much different though do you?

 

[Locke]

The BC's are a bit bigger.

 

[poonman]

yea i guess so, and the idle lopes and metal may be different.

 

[sbengineering]

i like em.

 

[96gstdsm]

Picking up my car today. Got it all built up with some bc 272's in there. Will have it dyno tuned this weekend and I'll give some feedback then. Breaking it in for another 400 miles still so won't really be able to tell until I tune it.

 

[mini zilo]

Hah, yep, pretty confusing stuff, Crower and Brian Crower. I can't wait to put these in, they come to today. UPS tracking FTW! Anyways, I guess there is not too much info out there about these cams. When I am done installing them I will fix that!

 

[D_Eclipse9916]

I have em they idle fine, not a problem.

 

[TrboANTsi]

im waiting to get my car back but i have them going in also. heard good things about them great price too.

 

[96gstdsm]

Just got my car back today with them in my new engine. They idle really fine. Doesn't sound much different then my stock cams I had in before. has a very slight lope at idle but nothing much. I'm sure after tuning and adjusting the cam gears that could change a bit but right now I have them zero'd in. Haven't gotten on the gas too much yet since I am breaking in my engine, but so far they seem awesome.

 

[Cracker_Jack]

Alright every one eithere Im not looking in the right spot or its just not there but I was wondering if any one is running these cams on stock pistons valves and connecting rods, i am going to be purchasing the walbro 255fp, AEm fuel rail with injection Dynamics 1k cc inj. DSMLINKV3.

 

[richard33]

I ran these cams in a bone stock 200k + mile motor with a 16g. When I was maxing out the turbo on e85 though the vavles started floating at high RPM(7.5k). I put some super tech dual valve springs in and revved the car to 9k no problem.

 

[keltalon]

I am just looking for some additional information on these cams. I just ordered them and would like some opinions on them, what they are good for, etc. Would you recommend them? Thanks, I started this thread because I couldn't fine any good info on these cams when searching.

scroll down to post #31 and shortly there after you will also see a dyno sheet.

http://www.dsmtuners.com/forums/cyl...est-delta-hks-272-delta-k272-bc-272-cams.html

 

[DC47A]

Good for dyno numbers

 

[GsXdSmKingGsX]

Good cam. Some people prefer FP's and what not. As most on here know, I fully back the use of these cams.