Resolved 2G Need help! Won’t start.

[Dylan94]

Ok. So I’m getting spark on all cylinders. New cam sensor, plugs, and wires. Had it running but had a miss in it before putting new plugs and wires on it. Now it just cranks and starts to fire. Sometimes backfires Not sure where to look now

You must be logged in to view this image or video.

 

[pauleyman]

If it was running and all you did was wires check the firing order

 

[steve]

Last time you had the wires on wrong... Any chance you did it again?

Resolved - 2G Need help! Starts but runs 3-5 seconds then dies

Ok here’s what’s going on. 99 GST. 1G head swap. Got the car with rod knock. Swapped a new bottom end on and put it all together. Starts but runs 3-5 seconds then dies. Miss on 2 and 4 after a few tries got it running. Came back 15-20 min later and again. Only ran for 3-5 seconds and would die...

www.dsmtuners.com

It looks like you changed the BOV and the new one is open to ATM but you look to be running a MAF. That isn't going to help. Also you use to have a mess with a single manifold reference hose (long) connecting the BOV and other things off it. That is also not such a great idea.

 

[Dylan94]

If it was running and all you did was wires check the firing order

It was the wires. Not sure how I messed it up but I did. Thanks!