The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Resolved 1G Leaking oil where filter goes

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Solution
assuming you have the oil/water cooler.

there are 2 things to try.

1: take the oil filter off and see if the stud that it threads onto is loose. tighten as needed.

2: remove the oil cooler and take an oil filter Oring and replace the ring that goes between the oil filter housing and the cooler.


Bryan
assuming you have the oil/water cooler.

there are 2 things to try.

1: take the oil filter off and see if the stud that it threads onto is loose. tighten as needed.

2: remove the oil cooler and take an oil filter Oring and replace the ring that goes between the oil filter housing and the cooler.


Bryan
 
Solution
Its the oil filter adapter you got to take it off and put a new seal on it just use a seal off another oil filter it works fine dont drive it around like that alot of these cars have blown up from oil leaking out of that seal. I think its a 22mm or 24mm!!
 
I know one time I took the filter off and the seal came off the old filter ,then I put the new filter on without knowing it.So there was two filter seals on the car. It leaked till I figured out what happened.:ohdamn:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top