So my previous post have been me just trying to find out why my valve cover keeps leaking. I have a Hyundai Rocker Valve Cover. It didn’t leak for the first 3 days and now recently started to leak again.It is also throwing white smoke out of the exhaust and I used a scanner and it told me it...

Hey all, hoping for some insight here. So, recently got my car back up and running. Runs great drives great other than turbo lag which is why I've been messing with ALS. Little background for anyone reading this, I do have the clutch switch mod done, ECMlink v3 does see the clutch switch go...

Hi to all. Im loking for windshield for Eclipse 1991. Part number MB479234

So, i recently purchased a 1997 Mitsubishi Eclipse GS and i want to learn how to build my own engine for it. My plan if possible is to build a 420A 2.4L 16V Engine + Twin Turbo! Which i call "420A-TT". My family friend who has owned many eclipses including VR4's, RS's, GSX's. Said that i...

Just got into DSM in general and I’m looking to by A 97-99 GSX. Does anyone have any recommendations for where to look? Is there a place to look at cars being sold on the DSMtuners website? If so how do I do it? Anything helps. Thanks!

(First part) Hello, I bought a 1g head and noticed the Camshafts have symbols/ branding on them. I dont know if these are oem or if they are aftermarket. Please help!(Second part) my 2g bottom end came with arp eagle hardware. Usually that means that my rods are aftermarket but I can’t tell, I...

Not finding a lot of options on this one. I've already been asking around, and I may have a couple leads, but I figured I'd ask in a thread anyway.Any leads on where I can find a Hot Parts kit? Still learning how it all pieces together in the grand scheme of things, but I am seeing some wild...

Hello! Everyone! I changed my sparkplugs recently thinking that maybe the reason it idled and had such a hard time accelerating was that it needed new sparkplugs it went away for a couple of days but started to act up again this week. I changed them about two weeks ago and I thought the problem...

Okay- I have a 99 Eclipse GST I also have a 95 Talon with the 4G63T. The eclipse jumped time and needless to say the engine was trashed. So we took the engine out of the Talon, swapped some parts and threw it in along with the ECU. Wouldn’t run. Come to find out it was a 2G-a vs 2G-b cam sensor...

Which would you recommend?

My 2g has been sitting for a while due to a busted brake line under the car. After working on the engine and cleaning the car up over time it’s time to get the brakes fixed. From my observation I’m looking at replacing all of the hard brake lines under the car. So all new brake lines at that...

HI, I am trying to isolate this weird oscillating metallic chattering noise coming from the bell housing area @ 2800-3000 RPM.When driving and accelerating the noise comes in steady at 2800-3500 RPM and then goes away,. Noise is pretty much only occurring in that RPM range.I have noticed...

Does anyone have a final remedy to address the oil leak from the lower timing belt tensioner bolt on a 6 bolt? (photo attached)I have read post, but wanted to get a fresh suggestion as most post are from early 2000'sI have used 3 bond on the bolt, but obviously it still leaks.Also is there...

Someone has put this ebay rail is for evo but I would like to put it on my dsm more for aesthetics than for performance, I know it will not be as good as an aem but, I would like to know if someone has put it, it seems that it brings AN fittings but I have seen that many bring an adapter so that...

I am looking for a replacement clutch kit for a 95 eclipse 2gNT as close to OEM as possible. Any suggestions or recommendations are appreciated. Yee yee

So just recently I have started having issues with my transmission. When the car is off shifting is smooth, when the car is idling it's very hard to get it into any gear, once you get it into gear you can hear some chatter/metal rotating on metal noise, this goes away once you start driving...

hey just looking for some info on what could possibly be wrong with my dsm. drove fine a month ago but sat a month and won't start. it cranks over fine and has plenty of fuel getting to the rail, but lost spark and the injectors will not pulse because no matter how much I crank it plugs remain...

Hi all! In November I made a post about needing some help fixing the wiring harness for my headlight but what I didn't notice was that the connector had literally melted off! I don't know how or when it started to happen. It's been a HEADACHE looking for the piece in the junkyard but we can't...

Hello everyone. As we all know, these are trying times, especially for the small business owners. With that, I have been developing, with the help of several DSMers from around the world, a list of DSM supporting vendors. With this I am hoping that when yall need to order some parts, you think...

(As I always do, I apologize for any translation errors)I have a 2g GST and I am recently having overheating problems. Basically, the car only gets hot when I'm idling. Even with the radiator fan on (starting at 195 ºF), it keeps heating up. What I noticed is that if I keep the car stopped...

1997 Mitsubishi Eclipse GSX - 7 bolt - 5 speed manual - 69,000 miles on chassis - Original Title Great looking eclipse with a rebuilt engine. It is now a 2.3 liter stroker with the internals to handle huge output. The car starts right up! It is ready to get its new computer, fuel pump, and...

hi im nick im new to the whole dsm and boosting a car scene. i have a 14B turbo i just bought rc550 fuel injectors and a walboro 255lph fuel pump with all the new re wiring off of stm tuned and a AEM fuel pressure regulator kit. is this a okay setup? what boost levels should i run should i up...

So I have done some reading and cant find an answer. Both my boost gauge and map sensor are showing around 15-17 psi at full boost, however the boostest calculated from the mas is reading 33. Why would this be showing basically double what my actual readings are? My first guess would be boost...

New lower rocker retainers/clips for 1ga talon sideskirts. Also available are the tabs that cover the wing screw behind the door on 1ga talons.

Hi guys. I just bought a 1998 Mitsubishi Eclipse GS off a close friend of mine. Long story short, it was his high school car that he junked about 5 years ago and I thought it would be funny to buy it and bring it back to life. No laughs yet, just cries I drove it from Yuma, Az to Los Angeles...

I’m hearing a rattle between 1k - 3k rpm. Shop said it could be stock exhaust vibration, or lifters. Any better idea what it may be? Could this become an expensive problem? I have a 1990 AWD 1G GSX fully stock, stock turbo engine. I greatly appreciate any feedback!

Hi all, I want to share some useful info with you guys.Last year I had a bad batch of fuel and I melt a piston. My engine is a 6 bolt, 2.0 long rod with 9.4:1 compression, custom JE pistons 0.02” overbore and 272 kelford cams. The car was running great for 2 years at 26 psi boost with 93...

I have a 4 sets of replica wing screw covers left for sale. Also 2 sets of lower rocker retainers/clips (these hold the side skirts on. These are 1ga talon parts made of abs plastic. Message for prices.

Just got my DSMLINK v3 installed yesterday and finally had the time to start cruising and doing some pulls. I noticed it's pretty regular that I get knock ranging from 3-10 any time that I do a WOT pull. I'm very novice at tuning but I did manage to get my idle near perfect my airflowperrev is a...

My DSMLINK v3 is out for delivery right now, it is a used unit. I have done some reading and gathered that I should Download a stock file configuration and or make sure all sliders are set to 0 and I adjust for my injector size.I've recently did maintenance such as head gasket, timing...

I have some stock parts that I pulled out of my 2g, the valves are well used and missing one exhaust valve due to some damage. The rest are all fine when I pulled from my head, the cams I'm pretty sure are just stock cams if anyone can identify the markings on them further that'd be great.I...

I have a 1997 GSX that the previous owner had put in a black box ECU, I am having trouble finding a shop that will tune it. I was told by english racing if I install an Evo 8 ECU they will tune the car.I found this guide...

Left over rebuild itemsBRAND NEW Topline head bolts/washers - $25 Shipped Balance shaft delete kit - $45 Shipped Balance shaft belt and pulley - $45 ShippedUSED Stock cam shafts out of 7 bolt - Offer Intake and exhaust valves - Offer

Ok so I have all of my timing marks aligned correctly. I am trying to install the belt but it does not have enough slack, I have the tensioner pulley completely lose and the grenade pin still inserted in the auto tensioner. I followed the vfaq for correct routing and that does not work. All my...

Just got my new seals and valves installed, got water sitting on the valves to see if any leaks exists. After that I'll install the BC268/272 cams shafts and cam gears. Everything went smooth and I used the K-motors compressor tool, it was only $50.