I know there's about 5 thousand posts about this but im kind of at my wits end and out of options and every post i read is pretty much all conflicting information. Ive read just about everything can find, and watched all the videos if Kurts (bastarddsm) explanations and recommendations, etc and...

I was having a bunch of clutch issues and couldn't seem to figure out the problem, so I dropped it off at a shop where they were able to get good pressure again (I couldn't before) after replacing the master cylinder. Sadly, they were still unable to get it into gear. They think the transmission...

This happened a while back, I told the person fixing it that it was the throwout bearing. They just replaced the whole transmission. After it was replaced it was good for like 20 miles then it came back. I’m pissed I need the exact reason it’s doing this so I don’t have to waste any more money...

Hello guys. I got a problem with my 2g. I’ve got a 97’ 2G with a 4g63 manual transmission. I was driving on the Autobahn when my car startet to rev in gear but slowed down. I made it to a parking lot and tried to drive off again but it would just rev but not move. So I towed it home and changed...

So my car blew a clutch (ACT2600) a while back. (pressure plate fingers blew off, and disc was worn)I Removed the transmission and installed a new ACT 2600 sprung hub 6 puck assembly. I also installed a new Slave cylinder, Clutch fork, and throw out bearing w/clip. I then bled my clutch many...

95 manual Eclipse GST. Installed a brand new clutch about 3 weeks ago. After finishing other details on the car, I took it for a test drive. 10 min after driving it, clutch simply stopped working. No pressure at all. Gears do go in. Any ideas?Thank you.

Hello everyone, I know I’ve seen a few post similar to this but I just want to make sure before I do anything else (take the tranny down) but I installed a new clutch system with a MB010X ACT PP, with a South Bend Stage 3 Clutch and when I had put everything back together the car at first it...

hey guys I’m having a issue putting all 4 bolts back into my clutch. I can only get one in and then the other 3 won’t align at all with the rest it’s mind boggling but if anyone has a solution let me know or maybe I’m doing it wrong. Side note: I didn’t replace my flex plate can that be the issue??

So I recently bought a '95 eclipse gst, but after a few days of owning it the clutch pedal stuck to the floor. I got it towed to a shop because I was really far from home and they replaced the master and slave cylinders. Apparently the bolts were stripped and fell out, causing it to fail...

When i put the car in reverse. I can hear loud clunking and almost stalling until either the clutch is pressed all the way in or placed back in neutral.its slightly the same in first except it doesnt start shacking and clunking nearly as bad and actually able to pull off.how it started...

My 1990 Eclipse GSX won’t go into any gear when I try and shift, so the car has been immobile. It will only go into reverse but will grind so I pull back into neutral. It did not do this when I first got the car but after I replaced the clutch master and slave cylinder (I did this because it...

My clutch went out on my 97 spyder gs. The transmission has been switched out. I believe it’s the transmission for the 2.0 turbo. (kf5m332spzt)So, what clutch and flywheel do I get? One for a 97 spyder 2.4L? Or one for a 2.0 turbo? Also, everywhere I look, I can’t find a clutch and flywheel...