Been tackling a few issues I've solved some things and others still havent figured out yet.At high RPM at 15 psi my car would hit what feels to be fuel cut. So I rewired and installed a walbro 190 and it still seems to have the same issue.Sometimes usually when the car is warmed up it will...

The line that I am pointing at how much fuel should come out of this line? I have a 1/4 tank gas and it just keeps coming out. I used a straw to get it to drain onto the floor and not on top of the pump but it still kept coming out

So i have a feeling the lower one with the spade connector is the oil pressure sensor or switch. I'm not sure which one is which though. And the other one with the small black rubber boot I have no idea.You must be registered to see element. You must be registered to see element.

Genuine S90 Super90 Throttle body for Evo 1-3 / DSM You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. This is the new version that comes with a bigger shaft This new design will overcome...

1000cc PTE injectors - SOLD Stock 2g Exhaust manifold - $30 + Shipping - SOLD [1G] MAFT v2.02 - $130 Shipped - SOLD Large FMIC 3" inlet/outlet - SOLD White high rise eclipse spoiler - $100 Local pickup only. Good condition tan rear seats - $100 Local pickup only.I think that's everything...

Hey guys.. I just recently fixed some electrical issues with my gsx, only to be welcomed with the amazing sound of something knocking / ticking in the engine!Just when I thought everything was perfect... lol. Just kidding, I'm glad to be apart of the DSM World!I'm really hoping this sound is...

My name is beau and i bought an evo 9 back in may and i love my evo and spend all my money on it (which isnt very much lmao)You must be registered to see element.

I’m removing a 2g head from a 1g car that has been port matched to accept a 1g intake complete head minus cams! Make offer!!!

So I recently rebuilt my throttle body and it will still leaking after putting it back on the car. Well today I removed the throttle body and used a dremel with a soft wire brush to clean and even out both sides of the throttle body, intake manifold, and throttle body elbow. I also placed...

Selling a white 2nd gen gsx spoiler in good condition: Make an offerAlso selling tan and gray interior pieces out of my 97 GSX I have majority of all the interior panels including seat belts, center console, etc.I prefer local sale on these only. I don't have time to pack and ship things at...

Since my idle increased after installing these I'm almost certain this was the reason lol. Fully warmed up my idle is around 1500, prior to install my idle was probably around 800. Could this also be due to my blown turbo though? I'm thinking about leaving the FP exhaust manifold on but changing...

So my gsx has felt sluggish since getting it but seemed stout. It's a 2.3l stroker so figured the 14b that's on it was a little weak for it, I changed out my stock manifold and intake to FP and that didnt make any noticable changed. Other then my idle being a little higher then before. However...

Selling some extra parts that I got with my car, no issues with any of them. I already have a smaller front mount installed and only have the stock turbo so no need for a large intercooler or 1000cc injectors.I also have a ton of interior pieces that are in good condition. They are mostly Tan...

Anyone got any ideas on where I can permanently install my catch can? I only put it on for now to seal off the nipple on the intake pipe so it doesn't have a leak post MAF. I could get a longer hose to much it, but I don't have any mounting room anywhere to get it to sit up right.Also I still...

Been a long time since I have been on here, but I recently just sold my 2004 WRX STI. I am looking to get any manual AWD DSM that's in decent shape.I have been chatting with a guy that's about 6 hours away. He has what seems to be an overall good condition 95 talon TSI. It has just under 190k...

Aem standalone 1995-1999 Mitsubishi Eclipse gsx/gst plug and play ecu includes serial to USB data cable $650 shipped You must be registered to see element. You must be registered to see element. You must be registered to see element.

Just trying to find a mechanic I can rely on taking my 2g to as I no longer have a place to work on it myself.There’s no shortage in shops but I’m specifically looking for someone who specializes or knows their way around the dsm.

Sold

Hi I have a completely stock 95 gst with a stock 7 bolt. I’m planning on swapping that over to a built 6 bolt. Does any one know anything I have to change for the 6 to go in or is it just a straight bolt up?

Is it common to use a 2G CAS on a 1G 6 bolt (90 TSI)? When ordering the Haltech 4G63 terminated harness they can custom fab it for a 2G CAS for a 1G engine. Has anyone installed the Kiggly Racing CKP kit for a 1G using the Haltech terminated harness with the Elite 1500, is there anything in...

Hey guys just wondering what kind of coolant shud i use right now i have like a yellow/Green? one but some say i can change that and use red one like The VW/Audi use? So have anyone The right stuff lol You must be registered to see element.

I have a complete white 91 Eagle Talon AWD Automatic 2.0 Turbo. It has major rust issues on the button side of the body and frame. Unsafe to drive in my opinion. Too much to repair!! Gas tank has been removed but I still have it, with repairs done to tank and pump.2nd car: Orange 90 Eagle...

90mm accufab throttlebody, gasket,Jackson auto machine throttle rotor,idle air block off plate, and mounting bolts. Fits 1g & 2g dsm magnus motorsports sheet metal intake manifolds or any intake manifold with a 1986 through 1993 Ford mustang bolt pattern (3.5 x3.5") $250 shipped. You must be...

First of all, sorry if i'm posting this on the wrong section of the forum. I can move this post if needed. (And sorry for eventual english mistakes)My name is Marcelo, I'm from Brazil and I'm owner of a 95' GST After a series of disappointments with the mechanics where I live, I decided to...

Car runs fine under load, and even when you start it for the first 5 or so seconds when idle is high, When idle settles at around 850 you can really feel the engine vibrations and misfire. The Galant is running and driving but the vibration is extremely worrying, at stop and go traffic the idle...

You must be registered to see element.

Bunch of left over parts and parts from a car I parted out. All prices do NOT include shipping!I have a 20g turbo externally gated. Can sell manifold turbos and precision 39mm wastegate with dump pipe all together - $600. 2 tial 38mm wastegates silver. Minor cosmetic scratches perfect...

Hello, family dsm, I am restoring an eagle talon tsi 91, my name is Ricardo, I have an eagle talon tsi fwd, I bought this car also 1 year, I bought it with a rare conversion since it contained the 4g67 with the turbo canceled, I I put everything on the 4g63t, I have a question for us, when I...

looking to buy and 4G63T 6 bolt long block. Its going in a 1992 1G B eagle talon TSI. Looking to shipping to Washington state. Text 253.441.5027

HI everyone! Alright so i just wanted a second opinion on these specs that i came up with so far. And everything seems to be okay so far. The motor is just a stock rebuild with .020 pistons, arp headstuds and a balance shaft delete. But heres what I've gotten done so far. -Main journal oil...

$1,500 On on op Clean title 133,000 ish miles Located in Northern California 4g63t engineUpdate: I rebuilt the car, it ran fine at first, but after about a week later I didn't notice I was running on low coolant and was overheating the car. It later started blowing white smoke out the pipe...

Did these come stock in any Eclipse or Talon? Is this just an engine with the turbo system removed? Is it any better than the 420a as it sits?I just randomly stumbled across this on Ebay and wondered WHY

hello, I have yet to find any articles of a 420a dsm having this issue. this is an intermittent problem, and sometimes I can drive the car just fine, other times it is such a pain to go anywhere. it will die and sometimes jump itself back into life, though sometimes ill sit there for over an...

I bought this COP setup a while ago and I don't think I'm going to end up using it. Has a JMFab plate and looks clean, all wired up ready to install. $150 shipped, Text 573-355-4269 if interested, thanks!

Hello,I´m new into the world of DSM I have been reading a lot and practicing with my cars (I have a 1990 GST and a 1993 GS) I love this cars but this is my first time owning one.Here is my problem the gearbox on my GST is broken the 5th gear and syncros are busted. The gearbox code is KF5M33...

Selling a freshly machined 6 bolt head , I had the work done at S&S machine in Tempe, AZ. The head received a 3 angle valve job ended up using new OEM sized valves and then the head was resurfaced and deep cleaned. Asking 500 for the head with no cams or lifters, I have a very nice set of stock...

Hey everyone,I am going to try to document the work on the Hill Climb Car and as much of my racing and shenanigans as I can on my youtube channel. Please go give it a follow and help me out! Drop your channels below!You must be registered to see element.You must be registered to see element.

Before anyone says about reading other posts, I have, haven't found similar situation yetI want to turbo my GS, I am using everything stock (turbo ecu, injectors, smic, turbo gearbox, etc.) and I want to be on the safe side. Going with either t25 or 14b for now. (Goal 220-240 bhp), Some...

Hey so I'm selling of some of my 1g parts that came off my 1992 gsx awd. Text me 8048156832T3 Turbo manifold (Sold) Tial 38mm wastegate Maf translator Brian Crower cams 270 Hks cams 272 T3 godspeed turbo 950 fmic fuel injectors Bov. (Sold) Stock 4g63 rebuilt block ( pickup only) Turbo...

Admittedly I inherited this problem with the slim fans (set up to be pushers mounted to the front of the radiator) on my car as they were installed before I bought it. Problem is I don’t think they ever worked and I hadn’t driven the car in stop and go traffic before so I hadn’t noticed any...

I'm selling my built 4G63 6 bolt complete short block + headIt's a 2.0 Built engine with zero miles. Block was torque plate honed, bored to 85.5mm. It has New Wiseco Pistons , Eagle rods, stock crank was micro polished. King racing bearings. New ARP main studs and Head studs , Oem oil pump and...

im parting out a 91 talon awd has 78k OG miles the block is at the machine shop just need to pick it up but it will need to Assembled I have trans t case turbo setup downpipe and other stuff just pm me and we can make a deal BUYER PAYS SHIPPING AND PAYPAL FEES. Everything is available don’t...

I finally found a dsm in El Paso worth getting into, 1990 Mits Eclipse GS 4g63t standard. I brought it home and started diagnosing the car and replaced fuel pump, cause power was there but pump doesn't turn on, that's done I'm getting fuel but now the car still doesn't fire up. I have spark but...

For sale : 4g63 dsm eclipse 90-99 engine 6 bolts. 3 Pistons Wiseco HD 1400 6625M85 Part number: K625M85 and 3 Rods Manley "H" Beam in Diameter: (21mm) Good condition ! $199Manley stainless steel exhaust & intake valves 1mm oversize. Bought from Extremepsi. Used but in good condition ! $160...

I made a diagram of what I was thinking about doing with my oil catch can so I don't waste so much oil, just wanted to make sure it would work since I don't have a clue about oil catch cans. I was going to tee the two lines coming off of the valve cover and then have them go to the vented oil...

I have available for sale a 95 talon tsi. it is in near stock condition, only mods are pcv delete, 20g turbo, and evo 9 bov. It is primed black which is shitty, but the original color is still under the primer. It was the factory cobalt blue color not sure the exact name. Notably, the body is...

So i was removing my shitty IAC valve that came with the engine from DSM and when i tried slowly pulling it out the whole thing split apart into 3 sections (so far.) The first pic is how it came out once I unscrewed it. The second is what was stuck at first, but slid off. Now I'm stuck with the...

You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered to see element. You must be registered...

FOR SALE | IN STOCK $5,000 //Stage1 4G63T 7-Bolt Long Block w/Extras You must be registered to see element. We are selling this already built //Stage1 7-bolt 4G63T Long Block at a discounted rate. Normally this build quotes out to around $5,500 not including some of the extras that come with...

Hello!I recently purchased a 1990 Eagle Talon TSI with a G4CS block and a 4G63 head. I am about to change the timing belt, idler pully, tensioner, and water pump because I am unsure of the last time this has been accomplished. I have searched the forums for anything that may differ in the...