wich vender sells this

[mustracetsi]

Hi guys. Quick question. Theres so many vendors that I looked through and now can not seem to find wich one it was. I looking for the vender that sells that vac plug to -an adapter for thos3 that wan to run an lines on valve cover to catch can without having to tread or weld an plugs to the valve cover. Thanks in advance.

 

[gofer]

STM ALUMINUM VALVE COVER -AN FITTING | 90-99 DSM

 

[Archer Fabrications]

Isnt that technically the same ID as the stock fitting....
Or do you have to pull it and bore it to a true -10AN. Cause there's no point unless the ID is true -10

 

[gofer]

It would be tough for that little fitting to have a true I.D. of a -10AN fitting considering its only -6AN.

You are right though, this piece is useless and I don't recommend wasting the $25 on the fitting or the $20 on the hose end you'll be threading onto it. If you want to upgrade to SS lines to a CC then upgrade to -8AN and just slip the hoses over the stock VC fittings.

Like this picture of my engine bay before I got fittings welded on.

You must be logged in to view this image or video.

 

[Archer Fabrications]

Ah didn't see it was -6 . I have -10 i'll be welding on my VC some day. Haha