Which nipple on lower tstat for oil cooler?

[DROPthatCLUTCH]

Which nipple on the lower thermostat housing goes to the oil cooler?

 

[Insane20]

On my 6 bolt my line gos from the first nipple under the t stat then to the turbo then to the oil filter housing.

 

[19Eclipse90]

Oil/Coolant lines, and Tranny cooler?

 

[DROPthatCLUTCH]

http://www.dsmtuners.com/forums/newbie-forum/443661-oil-coolant-lines-tranny-cooler.html#post153058114

I seen that thread before I made this one, it didn't seem to help me at all. I just ended up running it from the lower of the two 3/8" nipples down to the cooler, then to the water pipe.

 

[19Eclipse90]

Sorry it didn't seem to help. What you did is pretty much what that thread/post says. And what I mean by that thread/post, I mean by that first picture.

The 91-94 turbo thermostat housing has an additional nipple on the front of it that feeds the oil cooler. The position of the turbo coolant feed nipple (that is shown as "B") does not change. Thus, the additional nipple -- or the lower nipple -- on the front is for the oil cooler.

It's all a wash at the end of the day because there's nothing but a little bit of distance separating those two nipples in the thermostat housing. Glad you got it worked out.