2G what studs for FP manifold with 1/2" spacer

[dustyboner]

i keep finding shit wrong on this car i have been working on. Today i found that the studs for the manifold and spacer, were stock length ARPs that had only had about 3 turns into the head and 2 on the nut.
So i need to get some that actually are long enough.
All i could find on here was a post that said to use montero studs or something like that.
anybody know of anything better than that?

thanks;

 

[DSMPT]

The stock length studs are way too short. You would need about 60mm length studs. I used to buy the one in the pic below from this person (https://www.facebook.com/JonsAutoShack/) but maybe he doesn't sell it anymore.

How about those?
https://www.mcmaster.com/threaded-r...m/length~60mm/thread-size~m10/thread-size~m8/

The pic below is a FP manifold with a 1/2 spacer and 60mm studs.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[ist dwa]

I buy threaded rod and then cut them to length. I use only stainless and chase the ends with a die when finished with them.

 

[dustyboner]

what flavor of SS would be best for the studs.

===================================
who ever the idiot was that originally installed the turbo, didn't do anything correctly. The drain was too small, the feed line was melted to the turbine housing, the v-band wasn't the right size to seal up the connection and of course the studs were barely hanging on.
here's a picture of it.

You must be logged in to view this image or video.