What did you do to your DSM today?

[DaRKSiDeGSX]

Installed Cyclone intake. Now I dont have A/C anymore Nobody mentioned it dosnt fit the 90 A/C compressor

You must be logged in to view this image or video.

How did you address the flapper for the runners? wastegate method?

A/C is over rated in fast cars...

 

[caseyk]

Today, I decided I didnt like open downpipe anymore and finished the exhaust. Then after that I disconnected my battery so it would reset all codes. I then started it up and HOPED the check engine light stays off. Its the first time ive drove her since last week. So I figured a little cruise and some pulls would be nice.

 

[GSX_TC1]

Today I put the GST's 90 ECU in the VR4, and surprisingly it fired right up with it. I was like wow.

 

[HeatedCargo]

Today I added a new coupling from the intake to the turbo. The new coupling is a Mishimoto 2.5inch to 2inch picked it up for six bucks new. It was quick and easy it fit perfectly on my 14B turbo. Yesterday I replaced my leaking radiator with a stock temporary replacement rad. I am awaiting my Mishimoto dual core which should arrive by wensday latest. Lastly or should I say my first job on my car in late July. Was replacing the 1G bov for a GFB Responce bov. By the way GFB has a great idea with the whole recerc port and atmospheric port. Chose recerc for quiet of if you don't have a MAFT or go atmospheric, also having it on recerc made it quieter than the stock. Or set it on both ether way perfect bov for me I have nothing negative only good things to say about this bov. That's bout it I sorry bout the catching up part just wanted to add my two cents to the topic. =)

 

[Doubleot]

Put all the interior back together, Everything is clean as a whistle, I'll probably throw in my driver's side Corbeau tomorrow. Still undecided.

 

[GsXdSmKingGsX]

Replaced the O-ring on my fuel rail because it started spewing gasoline everywhere

 

[Boostinsideways]

Removed all the old tint from my talon Hatch. Put another couple of light coats of paint on it, and the spoiler. Paint looks decent now. Just going to clear it tomorrow and then reinstall.

Also took my dremel tool to the inside of the fender where the air filter goes. Opened it quite a bit for better airflow.

 

[Chicken Patty]

Well yesterday I installed a Prosport Water Temp Gauge with sensor. Rain had me working half assed all day to get the car running again. Today I'm going to loom up the wires and tidy it up a bit.

Here is a cell phone pic of the gauges:

You must be logged in to view this image or video.

 

[4Lurker4]

Painted my exhaust cover

 

[notched]

Pushes car out of highyway, walked 5 blocks to autozone, bought fuel pump,replaced fuel pump.

 

[Coalbey]

Got the motor ready to pull because the bent valves and broken piston

 

[Brentenorris]

Added freon to the a/c

 

[92AWDHX40]

Wet sanded clear coat, and painted exterior trim pieces, cowl, and wiper arms.

 

[constant_proj21]

Yesterday took it for a test drive, shredded the water pump belt, and she got a little steamy. No worries though, new belt and a tranny that actually has second gear is going in Monday or Tuesday.

Oh how I missed boost...

 

[GsxEcutioner]

Installed Cyclone intake. Now I dont have A/C anymore Nobody mentioned it dosnt fit the 90 A/C compressor

You must be logged in to view this image or video.

how did you deal with the coil pack mounting?

 

[Billiam]

I ordered some parts today, crank pullie, sending unit gasket, new oil cap, stainless clutch line, clutch alignment tool, and I think that's it.

 

[DaRKSiDeGSX]

Well yesterday I installed a Prosport Water Temp Gauge with sensor. Rain had me working half assed all day to get the car running again. Today I'm going to loom up the wires and tidy it up a bit.

Here is a cell phone pic of the gauges:

You must be logged in to view this image or video.

These gauges are pretty cool. They are in a talon I am looking at buying right now.

 

[99vipereater]

You must be logged in to view this image or video.

Put my fresh 2.3 L built motor in my car. I can hear this biotch rumble already.

 

[HeatedCargo]

I put in new door handles yesterday not painted just let them be mat black. It actually looks pretty good on the car.

 

[neontsi]

Blew the fricken head gasket as soon as I pulled it out of the shop for the first time...

 

[keithlag]

for a change all i did was cleen it and it ran fine

 

[Chicken Patty]

These gauges are pretty cool. They are in a talon I am looking at buying right now.

I love them!


---
- Sent from my iPhone using Tapatalk

 

[uscav_scout19d]

Towed it to a friends after the pressure plate exploded and tore my transmission up

 

[98gsxTX]

Nothing today, but tuning tomorrow, and more upgrades to come!

 

[KMOSES]

cleaned up my headlights

You must be logged in to view this image or video.