Unknown connectors

[Boost92awd]

Where do these connectors go?

There both behind the intake manifold, I cant find any place to plug them in.

[IMGhttp://i488.photobucket.com/albums/rr250/1slow92/Picture016.jpg[/IMG]

You must be logged in to view this image or video.

]



Could someone give me the part number to the connector metal clip that holds the clip to this.

You must be logged in to view this image or video.

 

[stevo911]

The 6 pin is for the ISC the metal part just use a paper clip and bend it into a U

 

[Boost92awd]

The 6 pin is for the ISC the metal part just use a paper clip and bend it into a U

Alright I'l try that.

 

[92AWDHX40]

Yes the isc connector the other i never used on my dsm i havent seen many dsm with that connected to anything.

 

[brownfinger]

The one taped to the harness is for A/C diagnostics, me thinks. Arrrgh. I just turned into pirate mode. Arrgh. Me thinks.
Someone asks about that connector every few weeks around here.

 

[steve]

The two pin is the EGRT (EGR Temp) input to the ECU most commonly used with a MAP sensor to log boost or cut inside the car and used as the input for a wideband.

 

[Boost92awd]

Still have no clue where this one goes. Its behind the intake manifold.

You must be logged in to view this image or video.

]

 

[snowborder714]

Isc?

 

[stevo911]

First reply I stated it was for the ISC look on the bottom of the throttle body.

 

[steve]

It's either the ISC or the injector resistor. What color wires run from it?